Parts for a 10x15 Dodson?

In need of two single roller sadddles with stud and rod, and two salldle springs. Purchased a set of saddle rods and springs for a 10x15 C&P in hopes that they would fit but no such luck. The Dodson saddle rods have a groove machined in the side of the rod that fits into a pin inside the roller frame. The C&P saddle rod has no such groove. Would it be possible to shear off the pin inside of the roller frame so that the C&P rods could be used? The C&P rods are the same diameter…..

Log in to send email

image: 1932361_10204211331536854_3154290292767421_n.jpg