Dickerson, 24 x 48 etching press

I have an electric Dickerson etching press that I’d like to sell ASAP The bed is 24 x 48. I’d like to get $700, if you can pick up in the next 2 weeks, I will take $500. The drums are solid steel. There is a central pressure screw, as opposed to two side screws. I have found rails to be helpful for relief printing, but not necessary for intaglio. The bed is dense composite material that has some chips on the edges but does not affect printing. Brand sells new beds to fit the press if you wanted to go that route. The press will need to be picked up near St.Peter, MN. The press breaks down and easily fits through standard doorways. I have used the press for the past two years. I have recently found a larger press to better accommodate my work. I’m not sure the age of the press, it certainly shows signs of use. The drums do not have any dents or problem spots.

Log in to send email


image: IMG_4427.JPG

IMG_4427.JPG

image: IMG_4426.JPG

IMG_4426.JPG

image: IMG_4424.JPG

IMG_4424.JPG

image: IMG_4421.JPG

IMG_4421.JPG