Sigwalt Nonpareil No.24 Bench Top Printing Press
The press will take standard Adana 8x5 Chases
Please note this is a very heavy press but should fit in the boot of a Saloon... more
Challenge one hole paper drill , good strong motor , good sized working table, foot operated for convience and comes with a few drills, excellent condition. ready you to load in... more
Kelton D-cylinder etching press with 12 x 18 inch bed. No welds or breaks. Includes the cast iron steel side table. This press has a massive lower roller and good impressional... more
1951 Heidelberg Windmill for Sale.
This press has been stored for the last few months in my home garage, because I no longer have room for it in my shop, but has been in... more
Used, but in good condition. Handbook of Automatic Platen Presswork by Chandler and Price. Contains lots of valuable platen press printing tips as well as guide for automatic... more
6 pt. Cond. #1,2,3,4; Ext. #1,2,3,4 (4 mags.) with sorts for all 12 pt. Cond. #5,6,7,8; Ext. #5,6,7,8 (4 mags.) with sorts for all. Delivery is possible.
more
I have two presses for sale. A C&P 10x15 new style, very good condition, good rollers. It has a variable speed drive that goes from zero to full speed very smòothly.... more
Kelsey Excelsior 6x10 Press for sale. The press is in good condition and comes with brand new rollers and trucks from Tarheel Roller that have never been used. I also have an... more
C&P Pilot 10” x 6.5” letterpress for sale. $3000
Along with the press you will also receive:
Base: $200 value
Assorted Ink Colors Including Metallics... more
I bought this press when I was doing large hand-printed woodblocks. Now that I’m an established letterpress printer, I don’t use the etching press any more.
This press... more
Selling our Vandercook 219AB - Adjustable Bed
Sad to see this go, we haven’t had it very long but our shop is too busy with production right now and unfortunately we... more
I have two chases for sale.
The forst has inside dimensions of 14” x 22”. The outside dimensions are 24” x 16-1/2”.
The second has inside dimensions of... more
I’m selling my Chandler and Price 26” cast iron manual paper cutter. I’ve used it for the past five years and it’s been great. It’s missing its... more
Wrenches to adjust the adjustable roller trucks on Chandler and Price 12x18. I imagine they would work on 12x18 Kluge too (?). 1 1/2” wrench. As you may already know, a... more
Two 18 drawer type cabinets with a double sided random. The runners are in reasonable condition for age, cases slide in and out without catching. As can be seen from the... more
I have a 12 x 18 Model N Kluge for sale. Asking 700 OBO.
It turns over everything moves fine, the motor mount casting is broken, but something else... more
RSS feed
