About Jes

Recent content

Title	Updated
Looking for foil heat plate	11 Feb 21
Heidelberg windmill 10x15 with foil 13x18 with...	26 Aug 18
Windmill rollers bearings and trucks	13 Jul 18
Heidelberg windmill motor	14 Oct 17
Heidelberg windmill sucker bar adjustment	6 May 17
Donation	2 Apr 17

Recent comments

Title ↓	Date
Your knife height it wrong. If the...	3 May
You can take off the plate and shaft...	20 Feb
Where are you located. I have a...	20 Mar
Where are you located. And would you...	2 Dec
Where are you located. Jeff	27 Nov
Where are you located, I might be able...	16 Mar
Where about are you located?	25 Mar
What part of Iowa are you located? Jeff	16 Aug
What is your score height. Can you take...	7 Mar
What is the serial number	17 Dec
What hurt letterpress.... Offset press...	1 Feb
What area of the country is the press...	17 Dec
What are you trying to run. There are...	12 Jul
Try turning your packing 180 and see if...	19 Nov
Try turning your Marbe over and see if...	21 Nov
Try putting a lot of grease in all the...	19 Jun
Try alternate feed. Print one sheet....	15 Jul
There is an oiling chart on the back of...	30 Jun
The press is 53” with the original...	20 Feb
Tell them to look in a...	14 Aug
Take the belt off and see if you still...	16 May
Take cases out of the cabinet. Put...	20 Aug
Sure did!!!!	11 Jun
Still check and make sure your die...	3 May
Run those printed sheets back thru and...	22 Dec
Print the metal (cut) ornament, scan it...	8 Jun
More	2 Apr
More	2 Apr
Looking around I did find the vertical...	7 May
Lock up one knife and diecut thru one...	30 Jul
Just because your car has 120 on the...	19 Mar
[email protected]	2 Sep
It needs to put out UV light	27 Feb
If you look at the third picture you...	25 Apr
If you desire not to do foil stamping I...	21 Jul
I would only use the 1000 watt there...	27 Feb
I purchased a black ball for $1500, if...	27 Nov
I have two Windmill I will be posting...	14 Nov
I have one just like that one. Will...	18 Mar
I have more pics but it won't let me...	2 Apr