About Finger_Print

image: Finger_Print's picture
Recent content
TitleUpdated
Densitomoter-transmission type 15 Dec 21
Etching Press used with relief forms5 Apr 19
Kimble Motor-Friction Drive-Making it work.26 Nov 18
Etching press Forums22 Feb 18
Maximum size of Boxcar base for C&P 10x158 Sep 17
C&P NS wavy roller rails7 Jun 17
Recent comments
TitleDate ↑
"I still have to give my old motor a...5 Jun
Me without my pitchfork.5 Jun
Mike, Just checking in to see how...6 Jun
Thank you for all of the feedback....9 Jun
" You must cure the cause and heal the...9 Jun
Thank you for answering the "Stones"...26 Jun
My wife will be working in the...11 Sep
My main take away from your comments...11 Sep
You may find an inexpensive pair of...6 Nov
Same problem here.15 Nov
My first press was an offset web. Built...22 Feb
22 Feb
Thank you for the suggestions. 23 Feb
Unless I am missing something, (as a...29 Mar
I recently learned that if you use a...4 Apr
Seems as though I remember reading...5 Apr
I noticed that the first horizontal...3 May
You may go to your local hvac or...10 Jul
Next addition could be an oscillating...23 Jul
So, I noticed on photo 5609 that it has...24 Jul
Looks like a surface top for being able...26 Jul
I am going with Bill on the pallet...1 Aug
Any wheel that is not steel will always...2 Aug
I would suggest a split-tone so to keep...22 Aug
I have seen a similar product at a...30 Aug
Good news in troubled times. Fritz, it...8 Oct
Appreciate the thought. Hard to read....18 Oct
Not a Heidelberg person, but that looks...23 Oct
Appreciate the verification on the...23 Oct
Appreciate the verification on the...23 Oct
In the book "Printing on the Iron...5 Apr
Thank you everyone for the great...8 Apr
Try to use a case builder that has...13 Sep
Try to use a case builder that has...13 Sep
I think that I once came across a...16 Dec
I can totally see this being used as a...25 Mar
Love it! One should be included with...26 Mar
Larry, I sent you a couple of messages...15 Jul
Public, If you all get the figured...17 Feb