About TollundPress

Recent content

Title	Updated
Heidelberg GT roller bearings (4 types)	11 Jan 24
Windmill Part Identification - Bent Knee + Foot	16 Nov 23
Heidelberg GT - Impression Strength	26 Jun 23
Heidelberg GT gripper height off platen + packing	25 Jun 23
Heidelberg GT Parts Book - Hi-Res Illustrations	18 Jun 23
Issue with Heidelberg GT gripper pick-up from...	6 May 23
Platen Jammed Shut on Heidelberg GT	23 Apr 23
Heidelberg GT Parts Swap	16 Feb 23
Windmill GT Parts Swap	28 Jan 23
Obtaining position/register w/ deckled paper on...	24 Dec 22

Recent comments

Title ↑	Date
@bppayne I actually have the swingaway...	8 Jan
@bppayne I fear you might be right but...	24 Aug
@Frank Thanks for that! Now you’ve...	25 Aug
@James Bourland - ha, yes - good...	24 Aug
@jhenry Thanks. Does that apply even...	24 Aug
@Michael… thanks - ok, wasn’t...	24 Aug
Ah, very good points everyone! Thanks a...	13 Jun
Boy, that IS beautiful! Thanks for...	26 Aug
Frank’s method worked. With the...	25 Apr
Funny I've never noticed either...	1 Feb
Gauge pin material: Just found the wire...	12 Jan
Glad you liked it... I'm updating and...	19 Nov
Ha ha, yes! I believe that that the...	28 Jul
Half (1/2) is not an option on the GT...	24 Aug
Have you considered Evapo-rust? I have...	17 Apr
Here's my dilemma put differently - the...	26 Jun
Hey Nipi I’m actually working on...	23 Aug
Hi Dennis, That was my first thought...	24 Apr
Hi everyone, Okay, even as they're...	15 Nov
Hi everyone, Okay, even as they're...	15 Nov
Hi Frank, Thanks for your thoughts....	24 Aug
Hi N, What page do you need? I’ll...	8 Feb
Hi Nick, I actually meant to write...	2 Aug
Hi Nipi Just sent you a DM... email...	13 Nov
Hi Nizim, That’s the “T220 - Side...	7 Mar
Hi Ted, I did the first cycle off...	23 Aug
Hi, Be careful! Your best move...	28 Sep
His corrections used to seem benign and...	21 Jan
Huh! That's really interesting. My...	25 Mar
I checked the roller height and it...	23 Aug
I could be wrong, but I’m pretty sure...	8 Feb
I do have the manual and the parts list...	23 Mar
I guess the previous owner must have...	8 Feb
I have never heard of one specifically...	8 Feb
I know, I noticed the same thing as I...	15 Feb
I realize now that the roller image...	27 Apr
I think I might have figured out what...	24 Aug
I would have attached some images, but...	24 Apr
In case someone encountered the same...	17 May
It’s not a die cutting jacket as...	2 Apr