About madmaudepress

image: madmaudepress's picture
Recent content
Goes Certificates - $30 for 300030 Sep 10
Lowering a Windmill10 Aug 10
Photopolymer on the Rocks1 Aug 10
C&P Pilot Roller Specs12 Feb 10
Interesting article on printing 1960's literary...24 Jan 10
Windmill Safety - (Stickin' my hand in it.)24 Jun 09
Removing Vandercook 4 Feed Shelf18 Dec 08
Schwabe Die Cutter - Adjusting Stroke?6 Nov 08
Intern with Mad Maude Press 22 Sep 08
Lead Type and Cabinets27 Jul 08
Recent comments
Title ↑Date
A C&P is only dangerous if you consider...23 Apr
A padding press would make short work...6 Jun
Angela, It was about $425, I think....31 Mar
Both print runs will take equal effort...24 Jul
But what causes the curl? In my...7 Apr
By the way, my current favorite is...17 Jul
Channel Matrix is so amazing and easy....8 Oct
Check out freightquote.com. I've priced...29 Jun
Don't worry. This isn't the end of the...16 Oct
For printing in the cold, I rigged a...27 Feb
Had a project like this once. Thought...24 Jun
http://www.vansonink.com/ts_msds.aspx...1 Aug
I agree that outputting film on a laser...19 Jun
I always like to throw in some support...18 Oct
I don't have any advice, but I do have...19 Jun
I evaluated some of the Toray stuff and...25 Mar
I had another thought about this, and I...1 Apr
I have a BAR PLATE die jacket for my...4 Jan
I have a Kwik-Print foil machine that...21 Jul
I have no advice, but I just went and...14 Oct
I have one of those Kwikprints. The guy...4 Dec
I have tried Spinks Envirotech, and I...23 Jun
I have two of these. They're handy for...13 Oct
I have used TG Rigging in Camden....19 Feb
I hooked my presses up with...30 Oct
I just use butcher paper ob my...22 Jan
I know that ugly rectangle all too...31 Mar
I love to print solids with linoleum...24 Feb
I oil them, bag them, and then put them...13 Apr
I recommend any DC motor with a...27 Jul
I started making one and luckily...30 Jan
I use Dotster for domain registration...23 Jun
I use the same half-moon technique as...27 Jul
I use them and they work well. I also...9 Mar
I used 1.5" solid steel rods from the...6 Jan
I was going to contact them after...7 Mar
I was running my 8x12 C&P with the...25 Feb
I would avoid that space. We had a...9 Oct
I would definitely go for the slab. I...2 Aug
If no one knows about letterpress, no...31 Oct