About eric m

image: eric m's picture
Recent content
TitleUpdated
eliminating static electricity11 Apr 09
Recent comments
Title ↑Date
1 hard hit, either a double sheet or...4 Mar
1) this is alot of welds. the weld in...6 Feb
A firm strike against any soft...25 Jun
a light coat of 77 on each half should...16 Dec
are you using rubber suckers? if so the...11 Feb
check into "metal stitching"part...26 Apr
do you have the proper wrench/tool for...28 Jul
get the correct size "roll" pin...2 May
great idea with the "score the roller....15 Mar
high speed challenge? just a guess, but...30 Apr
http://www.briarpress.org/24069 read...25 Jan
...14 Apr
i am a lefty too. some how i have...31 May
i have heard of some running a press...23 Mar
i just tape on a "blue steel" jacket....5 Feb
i know of the tinsel. even grounded to...11 Apr
if all parts are there, look into...12 May
in my experiance, scoring and creasing...11 Mar
it looks in the pic that some damage...17 Apr
josh, i will have to agree with...6 Jun
maybe check with a local tool rental...19 Apr
most foils will transfer within 165F-...12 Nov
nakai foil is rather expensive. CROWN...22 Apr
or, you can contact me. i will give you...8 Feb
possibly check that the gate lock is...15 Jul
retracted17 Mar
run your ink first. i am taking into...25 Jan
sure, it works. but the motor then...19 May
The dwell feature used to be very...12 Nov
the stainless will not rust but it is...10 Sep
this part is called the gate lock. it...14 Jun
this seems quite high to me. make sure...10 Sep
um... both... they both register well....1 May
waterboard it till it copitulates...27 Jun
well, the proper tool is bent like a...28 Jul
what press is this? off the cuff try Mc...5 May
what size did you get? my belt is...16 Jun
Wow! that gear has met a violent end....4 Mar
wow, they still wind foil on 1/2 in...10 Apr
ya come ON! that's like saying you lost...17 Sep