About ericm

Recent content

Title	Updated
Kluge foil shop closing	14 Sep 22
leaving ink on windmill system	12 Jun 22
Numbering Machine repair	5 Jun 22
Locing up your die cut	12 Feb 22
Largest numbering machines	29 Jan 22
edge gilding with foil	9 May 21
Kluge "No-Name Clutch"	11 Feb 20
copper die for printing	28 Oct 19
NCIS Los Angles	15 Jun 19
mid 70's Triumph Paper Cutter switch	23 Feb 19

Recent comments

Title ↑	Date
	18 Mar
1) is your image centered or a bit low...	23 Nov
1) should be stamped on the frame 2)...	20 Mar
1) the kluge feeders were added to...	9 Mar
1) Universal Engraving: Kansas 2) Metal...	20 Sep
1,000-1,200lbs	27 Apr
13-19 has new style steel frame, so i...	1 Jan
2 big issues here when we talk "nicks"....	16 May
2,000 miles... I would buy a capable...	30 Jan
240 is a 3 phase current. you would...	5 Apr
30 years ago, Mag dies were a...	4 Oct
300F is pretty high. i would inverst...	1 Apr
324 inches on an 8 1/2 x 5 1/2 sheet?...	17 Nov
3in wide plywood will work. Long enough...	22 Jul
80 bucks (up to about 4" x5") +...	21 Feb
? a few more details or questions with...	17 Aug
? I don't have a web site...	23 Jan
@ Dennis; Are you shutting heat off end...	13 Dec
a 12 x 18 kluge/CP would suit your...	11 Dec
a 6 x 9 plate wouldn't really need 3...	15 Oct
a close up of the control panel would...	28 Feb
a few degrees of movement is fine. it...	6 Mar
a few things could be checked by...	14 Oct
a file will most likely damage the...	8 Dec
a fully loaded kluge with both foil and...	4 Jun
a gear puller could be tried on this...	25 May
a good motor repair shop would likely...	10 Dec
a GOOD pair of scissors will cut that...	11 Jul
a heat plate system with controller is...	1 Feb
a nail won't work. way too soft. you...	22 Nov
a new single phase motor will prob cost...	17 Jan
a pic would be nice. other wise who...	23 Feb
a reference to size would be nice and...	31 Jan
a roll 24 in wide by 1,000 ft long is...	18 Feb
a sharp narrow chisel tapped into the...	3 Dec
A) Those prob are, peened over a bit...	9 Mar
A) As stated above, this is Not a...	1 Mar
A)the bolt should belong enough to...	23 Aug
acetate	19 Apr
Afavorite,,,, BEARS Eh???? well i am up...	11 May