About ohsotoxic

image: ohsotoxic's picture
Recent content
TitleUpdated
6.5x10 Chandler and Price Pilot Tabletop Press31 Jul 21
foil printing newbie9 Nov 17
metal dies for a kwikprint 86 machine23 Oct 17
paper cutters12 Jul 17
paper choices26 Jun 17
another one - inking issue15 May 17
Ink Recommendations27 Mar 17
Chase Base Question and Gripper Arms8 Mar 17
Cracked / Severed Foot on Golding Jobber #627 Feb 17
Flywheel on the Golding Jobbers20 Feb 17
Recent comments
TitleDate ↓
thanks ryan, I bought the foil from a...17 Nov
hi eric, thanks for your response. my...17 Nov
Thank you, I just measured mine - I was...24 Oct
Thank you for the visual John, and you...24 Oct
thanks for the help all. so in short it...24 Oct
i guess what I am understanding is that...24 Oct
hey john, thanks, so what you're saying...24 Oct
had my stock cut by a local print shop...17 Jul
Hi Mike thanks for your answer on that....13 Jul
the attached image is the machine I...13 Jul
so the machine I have has a "floating"...13 Jul
For reference, I BELIEVE this is what I...12 Jul
thanks for the offer steve, it would be...12 Jul
thanks Brad for your insight. I watched...12 Jul
this is an old thread, but I learned...29 Jun
deleting double post.28 Jun
thanks :) i purchased some lettra and...28 Jun
thank you HavenPress, I was on there...26 Jun
BTW - I understand this has been...26 Jun
Thank you, I will try less ink...12 Jun
I am using photopolymer plates from...9 Jun
Geoffrey, the main issue with my prints...7 Jun
attached is my print from last night...6 Jun
I am having this same issue with 2...6 Jun
Thanks everyone for your insight. I...17 May
here's another, closer view.15 May
HavenPress, that is what I thought. The...31 Mar
Thanks for the suggestions everyone....30 Mar
Hi everyone, so my machinist stopped by...17 Mar
John Henry, There's 2 roller hooks...10 Mar
Hi all, thank you for the help. Yes, my...9 Mar
Well, I am also looking for the...8 Mar
Hi Inky, It may not be less...8 Mar
And if it comes down to brazing vs....1 Mar
Hi Marshall, thanks for your insight....1 Mar
Thank you. That makes me feel a bit...28 Feb
Hi all, still looking for some expert...28 Feb
Thanks, I am searching now, I just need...27 Feb
Hi Ken, thanks, I'm pretty sure I have...21 Feb
thanks for the info. i will give them a...19 Sep