About rroddi

Recent content

Title	Updated
bikkie	16 Apr 10
assistance	16 Apr 10

Recent comments

Title	Date ↑
I ran one of these circ 1959-60 I did a...	27 Dec
hi courtney firstly do not use gasoline...	10 Feb
hi courtney,i am a fit and active 69...	11 Feb
hya toddmi ran a windmill for many...	6 Mar
Have a think about laying down your...	2 Oct
I have often cut plastic film on a...	24 Apr
i sit here amazed to read about all the...	29 May
Hya Lysbon give Coates a try they used...	22 Aug
all h/platen rollers are...	13 May
stand the roller on it's end locate the...	27 May
Until I retired I worked in Brisbane...	29 Jan
When I used to run envelope presses we...	17 Jul
I ran one for many years on & off used...	2 Dec
Hi Chuck, take of the jacket and with a...	17 Feb
Basic clamshell platen practice, if...	28 Jul
I have run millions during my 40 years...	25 Mar
The ink doctor on the h/platen is hard...	27 Jun
On the base of the pump on my platen...	20 Jul
All packing on a cylinder press should...	19 Sep
In the late fifties I ran a ce Kelly...	12 Oct
is your forme type high	17 Dec
I take it that you are using brass...	7 Jan
Are there any letterpress print shops...	8 Jan
having read the three comments so far...	15 Jan
I used to have a special tool. It was...	4 Apr
on most redballs there is a slot on the...	12 Apr
Perhaps an old timer living close to...	9 May
where abouts in OZ .are you?	23 Sep
Hi, just a quick tip from an oldie, in...	25 Sep
Hi, just a quick tip from an oldie, in...	25 Sep
All rollers on your press are the same...	6 Dec
It's a slug cutter	19 Dec
Many moons ago when I was an apprentice...	25 Jan
You will find that on the the Heidi...	26 Jan
When I was working we had several red...	19 Mar
All rollers on your platen should be...	2 Jul
When I was an apprentice aged 15 yrs. I...	15 Nov
It is also called Turps in O.Z. which...	6 Jul
I ran Hidies commercially for many...	19 Jul
Polymer plates can be used on...	13 Nov