About Hugo

Recent content

Title	Updated
C&P Type Saddle Spring Compression	17 Aug 14
C&P Platen Installation Mistake	1 Jul 13
Guillotine Paper Cutter	25 Feb 13
Heidelberg Platen More Lube Points	2 Jul 12
Heidelberg Platen	3 Jun 12
C&P Ink Roller Redesign	17 May 11
C&P Maingear/Pinion Misalignment	9 Dec 09
C&P Ink Disk Surface Worry	14 Nov 09
Original Motor for C&P 12x18	19 Oct 09
Press Choice for Artwork	10 Aug 09

Recent comments

Title	Date ↑
What you have there will be very...	22 Jul
While this discussion is about a motor...	10 Aug
Thanks for that Rich! The work that I...	10 Aug
I was kind of guessing that it would be...	11 Aug
From days in the machine shop many...	11 Aug
Josh, You can search for VFD and then...	18 Aug
Hey equitas, Drop me a note about what...	18 Aug
I would like to add one further option...	10 Oct
Winking cat, I don't know if you looked...	13 Oct
I'm working on a new style C&P...	15 Oct
I'm working on a new style C&P...	15 Oct
Watne, I'm working on a new style...	15 Oct
Bill, You mention the drive has a...	29 Oct
Rich, I've come to suspect that my...	29 Oct
Have a look on my blog...	14 Nov
Thanks for those comments! My disk is...	16 Nov
Here is the outcome: Once we got the...	18 Nov
I just had to run upstairs and take a...	19 Nov
Hm, this sounds like the same Alan and...	5 Dec
What I recommend is first cleaning the...	5 Dec
I am also looking at the way to best...	5 Dec
Yes the top face of the key has marks...	9 Dec
Ok, I was able to persuade the key out....	10 Dec
A question for everyone who commented...	31 Dec
This is obviously too late for your...	9 Apr
Thanks everyone for your insight and...	14 Jun
The roller on the left, which controls...	14 Jun
Aside from the voltage rating having to...	14 Jun
Does this info...	24 Aug
A couple of points on the wiring (the...	18 Mar
Thanks for those comments! Yes, I'm...	3 Jun
My press, a1964 red ball, came out of a...	3 Jun
Caleb, It's been a while since I...	3 Jun
Alan, Those comments come from two...	2 Jul
Peter, Sorry for the long interval...	7 Jul
Likely too late for your job, but I...	7 Jul
Here is what I did with my 12 x...	7 Jul
Ok, now that I have been able to turn...	11 Aug
Moved my C&P 12x18 from Seattle to...	16 Nov
This is so wrong on so many levels that...	18 Nov