About bwletterpress

image: bwletterpress's picture
Recent content
TitleUpdated
Stuck Throw-Off15 Mar 10
New Style C&P 10x15 Parts13 Dec 09
Bed Shaft & Short Throw-Off Shaft Specs - C&P New...13 Dec 09
Recent comments
TitleDate ↑
People using debossing and embossing...13 Feb
We just finished assembling a C&P New...9 Mar
Additionally... here is a similar post...9 Mar
All of DeFelice's restorations that I...10 Mar
When we were considering doing this for...10 Mar
That is the machine pin that keeps the...15 Mar
The pins are straight pins. I wouldn't...16 Mar
I will verify the levelness of the...16 Mar
Thanks. As stated before, when...18 Mar
You mentioned that you moved the plate...18 Mar
I haven't been able to try any of what...7 Apr
This may be stating the obvious, but...17 Feb
We use both Inkscape (primarily) and...25 Apr
We don't use a Vandercook, but when we...28 Apr
The registration marks that we use for...9 May
We had been renting a first floor...23 Jun
We use our 10x15 NS with only a treadle...7 Jul
I think that the 3/32" margin was to...18 Jul
A few others have mentioned this, but I...20 Jul
We loved working with them to move our...25 Jul
This may not be as much of an issue...28 Jul
If you are just talking about restoring...1 Aug
...2 Aug
I'd be wary of selling the press to the...17 Aug
Buying pre-cut coasters would limit...27 Sep
My knowledge of the variety of gauge...29 Sep
Excuse the ignorance, but are you...6 Oct
If there was additional costs to using...11 Oct
When we are working with photopolymer...17 Oct
I'm not familiar with this press or the...24 Oct
I am 6'4" (mostly legs) and we have a...27 Oct
Prefaced with the fact that we are NOT...3 Nov
Is part of the fundraising to pay for...18 Nov
Re: cautionary tale: What exactly sent...3 Jan
http://www.keldonpaper.com/ Lists...3 Feb
It may be worth it to disconnect the...9 Feb
That is unfortunate news since taking...10 Feb
You say that you get 10 bad prints for...10 Feb
Congratulations! Good to hear of some...13 Feb
Given that the thread has moved away...1 Mar