About danielheff

Recent content

Title	Updated
Heidelberg 10x15 Windmill	9 Nov 17
Clove St Press	21 May 17
Removing Windmill frisket holder	5 Feb 16
Heidelberg Foil puller	1 Oct 15
Side guide and gripper timing - Heidelberg Platen	29 Jul 15
Duplexing paper, what to squeeze it with?	24 Sep 14
Machining 10x15 ink fountain	26 Jun 14
Heidelberg - rollers or runners problem?	8 Apr 14
Windmill gripper alignment	10 Jan 14
Adding foil unit to windmill	21 Dec 13

Recent comments

Title	Date ↓
The delivery jogger only works when...	4 Oct
I'm curious as well. I have one in my...	25 Aug
My guess is that theres two things...	11 Jun
Be careful, I can see that your guide...	24 May
Do you have an iphone? If not use...	9 Mar
I bent the frisket holder, t2001 i...	7 Dec
Nice illustration. Make sure you're...	8 Jun
Mine was up on 2 2x4's spanning the...	24 May
Thats an interesting setup....	28 Mar
This is what CrownFlexo has been doing...	19 Jan
@inky, there are plenty of advantages...	16 Jan
What happens when you rotate the form...	13 Jan
My guess is you bought this press...	22 Dec
Your solution is in your last sentence...	14 Dec
Definitely interested in this as well....	13 Dec
it does not have that piece! I was just...	1 Oct
Take all your packing off, advance the...	5 Sep
Is there a reason why you want to keep...	22 Aug
	6 Aug
Use dial calipers, check the rollers...	6 Aug
I haven't done it myself but I've seen...	4 Aug
Is it the delivery side of the platen...	10 Jun
What you have there, is a typewriter....	5 Jun
You are ranting about technology...	28 May
Built in 1958 you're looking at a...	28 May
I think those are dried ink chips which...	27 May
About how much oil did you put into the...	14 Apr
My press never had one on it and I've...	8 Apr
That is a little fast. By timing that...	24 Mar
It's likely the bearings which hold the...	22 Feb
I bet you didn't change the screw on...	12 Feb
#11 & 15, while they are beautifully...	20 Jan
Just having fun. Good luck with the...	18 Jan
Well, were you given it for free or did...	17 Jan
check...	5 Jan
(sorry double post so here's more...	18 Dec
I'd also bet that your rollers trucks...	18 Dec
I'd bet it has nothing to do with the...	13 Nov
I second the shim way of doing it. Some...	6 Nov
Sounds like your impression bearings...	20 Oct