About phasetwo

image: phasetwo's picture
Recent content
TitleUpdated
Japanese Stab Binding - in mass quantity29 Aug 12
Linotype Video23 Aug 12
Similar to Vandercook...9 Aug 12
Pearl White 220# Lettra back order5 Aug 12
Halftones2 May 12
Whittenburg Inc30 Mar 12
Printer Geek Excitement.... Cylinder on the way!13 Mar 12
Lavandula Design2 Mar 12
Heidelberg Roller Rack13 Feb 12
Kimble Motor Control27 Jan 12
Recent comments
Title ↓Date
You are welcome! I started using...17 Aug
Well, we finally got it moved. Much...24 Mar
We use Putz as described by Chris with...19 Mar
We use a potdevin gluer and press....14 Apr
We have dies for most of those that we...18 Oct
Unfortunately, for traditional...1 Jun
They are threaded taper pins. Nothing...3 Jun
Thanks Gerald. We have done a few...6 May
Thanks Eric. Yes, getting your hand...27 Jan
Thanks Eric. Just what I needed. I...23 Aug
Thanks Alan. It is a press that has...13 Mar
Our folks use ATG tape..... lots of it....18 Oct
Note that revisions were made to the...10 Aug
Norman at Hicks Brothers may be able to...23 Jan
My point is that your dollars may be...7 Jan
My guess is no. Hern Iron works which...19 Dec
Learn packing for and feeding different...31 Mar
It is in great condition. One...14 Mar
in·fa·mous adjective 1. having...19 Jun
I would not buy from Neenah directly....2 Feb
I have found that if you cut a piece of...17 Aug
I do not have a picture available, but...21 May
I am starting to wonder if this is like...6 Jan
I am pretty sure that ink used to print...16 Apr
I agree with Fritz. There are...2 Sep
Hi Brad, To be clear, I am not...10 Aug
Hi Brad, I agree. The final...10 Aug
Hi Barbara, Thank you so much for...26 Aug
Here is a photo of what I mean. I also...17 Aug
Hate to say it, but you just need to...31 Mar
Hard to tell with the glare, but has...13 Sep
Foolproof, yes it is a halftone of a...5 May
Evapo-rust works wonders for rust. You...5 Aug
Dan is on the money. We clean the...5 May
Clearly a violation of eBays listing...21 Oct
Brazing or a new casting/part is the...6 Aug
Are the spline gears free of all...23 Nov
Also, the more I think about this the...6 Jan
@parallel_imp I agree that a...28 Aug
@modernman How do you keep the pin...17 Aug