About Luke

image: Luke's picture
Recent content
TitleUpdated
What is this?8 May 13
C&P extra parts?25 Mar 13
Press ID? WA state4 Feb 13
C&P parts wanted3 Jan 13
Recent comments
TitleDate ↓
That's clever. I've used the string...18 Aug
Call Hern Ironworks. I bet theirs...13 May
If it's motorized, just buy a new...6 May
I have done this a couple times, and it...3 Feb
I would talk to Nelson Trucking. I...5 Nov
I happened to see this today. I have...24 Sep
Megill Flexible Pins are fantastic....11 Jul
What size is your press? For...9 Jul
I bought one recently at Grainger on...8 Jul
The bolts on the old C&P's are not US...3 Jul
I made a quick sketch of what I believe...28 Jun
...16 Jun
While not exactly the same cutter, most...3 Jun
@ Alan, Getting gears made is easy...29 May
They offered both one and two piece ink...28 May
Looks like $110 will get you the shaft...13 May
Based on their other listings (and the...9 May
Had one followed the link, one might...8 May
Thomas, You can print your own...21 Apr
I second what DickG said. Alan has a...4 Apr
That's a really good point. If you...3 Apr
It shouldn't be a problem. The shaft...3 Apr
Power = Voltage * Amperage. You will...28 Mar
Google tells me that 550VAC three phase...27 Mar
Can you take a picture of the motor...27 Mar
You can use 2 or 4 rollers at a time....27 Mar
It's 8 revolutions per impression, and...27 Mar
I have the same cutter, so if you need...26 Mar
If you can read the pressure in the...19 Mar
Geoffrey has it exactly right. It is...16 Mar
You want a base that gets you to type...8 Mar
Mic6 AL plate comes cast and precision...8 Mar
If you can pull either the drive gear...3 Mar
There's a rocker on ebay right...20 Feb
Evan, I was just curious about this...8 Feb
Has anyone simply bought 7/8" mic6 AL...7 Feb
Eastside Saw does a great job. I...24 Jan