About AnonyMouse

Recent content

Title	Updated
Windmill motor - 1ph, 220V	14 Apr 16
VFD for a Windmill?	14 Apr 16
Sanderson's type recovered from the River Thames	20 Feb 15
CAD drawings of hard to find chases	5 Mar 14
Missing page in the common 10x15 parts book	13 Feb 14
Windmill register spindle - binding	26 Jul 13

Recent comments

Title ↓	Date
"...why do letterpress printing and use...	23 Oct
"Windmill" is an excellent nickname. It...	5 Feb
"The environmental conditions of your...	22 May
"Standard setup" is a bit vague. I'd...	12 Feb
"So like a Valvoline?" The brand of...	21 Mar
"I took apart the roller pieces, the...	25 Apr
"Fuel oil is a general term for a...	27 Sep
^^Agree. The large ink drum also...	18 Oct
^That could indicate a bad bearing...	23 Apr
Yup, if a press is overpacked, it can...	23 Jan
Youtube videos can be played at .25...	11 Mar
You might try stopping the press just...	21 Mar
You might try running the feed pile a...	27 Feb
You might try getting some video on...	26 Jan
You may need to adjust the platen to...	19 Mar
You may have seen this...	28 Jul
You may find on some C&Ps that there is...	4 Sep
You could test this:	21 Apr
You can clean the press with rags and...	25 Sep
Yes... it should move left-right (but...	25 Feb
Yes, wear would seem extreme. But I...	22 Apr
Yes, the upper ring is the lock. The...	13 Dec
Yes, the center bolt should be tight....	29 Sep
Yes, I forgot the older style...	7 Nov
Yes, but it's not as simple as just...	14 Mar
Yep. Hairline registration when tweaked...	22 Jun
Yay! By the way, the manual and...	13 Feb
WRT no way to tell before the second...	25 Nov
With regards to the knocking noise, I...	6 Nov
With power off, I'd advance the press...	2 Apr
Windmills can run any quantity. The...	5 Sep
When time and will permit, please...	10 Nov
What is being used to clean the...	7 Nov
What are you cleaning the press with?...	17 Apr
Well, when you haven't got much to...	27 Jul
Well then, regarding the picture of...	6 Jan
We find that grippers without the...	23 Jun
Was the motor known to be good prior to...	29 Aug
Variable speed is a must for all but...	23 Feb
Usually, "like dissolves like", so oil...	28 Sep