About jfitz

image: jfitz's picture
  • Jim Fitzgerald
  • (3) 10x15 Heidelberg Platen (1 w/foil), 12x18 Windmill with side pull foil, Miehle v50x, C&P 12x18 w/Kluge feeder, C&P 8x12 handfeed OS, 12x18 Kluge diecutter with foil
  • United States
  • cedarparkprinting.com
Recent content
Kluge "N" Series Pump Rebuild20 Sep 19
Help needed from owner of 12x18 C&P with Kluge...18 May 19
Recommendations for "Kiss Cut" label stock6 Nov 18
Fit & Registration Vs. Speed19 Mar 17
Leibinger #13 Numbering Machine Help11 Jan 17
I told myself I wouldn't do this....1 Dec 16
Heidelberg Cake13 Nov 16
Modifying an embossing die?8 Sep 16
12 x 18 C&P register parts needed9 Jul 16
12 x 18 C&P Swing Away Gripper Bar9 Jul 16
Recent comments
Title ↑Date
2727- I am not even sure that my parts...27 Feb
AnonyMouse- Tried your suggestion, it...4 Feb
Back in the 70's we used to mount 16...22 Apr
Catherine- Check the ink ductor...31 Jan
Colophon Press..I did try anti-static...10 Apr
Daniel- I usually just would pull...24 Jan
dicharry, thank you. I ordered one...18 Dec
Dick- Do you know who makes the tool?8 Jul
Do you have a picture of the parts that...19 Nov
Double Post, Sorry.8 Sep
Doug- The measurements I have...5 Aug
Emily- This might shed some light on...1 Jan
enriquevw- I have a unit from...24 Oct
enriquevw- You might try Fritz at N.A....23 Oct
ericm, I look forward to seeing...18 May
ericm- Yes, I did receive them. Thank...21 May
ericm- Yes, like fingernail. After...26 Jan
Flywheel - I have the the same issue...12 May
Foolproof546- Just sent you an email...13 Sep
Fritz- So I should file the edge down...27 Jan
GWAK- I did try that and it was too...27 Feb
Here is a reply I received from a...29 Feb
Here is the information I received from...29 Mar
Hopefully Ernie is just taking a break...28 Mar
houston- 150 DPI will work if the...24 Nov
I always put some strapping tape to...14 Jul
I am way too busy to have time to...28 Jan
I believe I have found a source for...24 Sep
I checked with Owosso and... Joe...15 Jan
I cleaned the flapper valve and put on...22 Nov
I did hear that Ernie's wife was pretty...28 Mar
I had a similar issue. I took all the...11 Apr
I had an issue with our ductor roller...15 Jun
I have decided to attend. Are there...24 Aug
I have had a few "mentors" during my...20 Aug
I have had mine stick before. The 2...11 Dec
I have received the carbon vanes...29 Jan
I have used acrylic nail powder with...26 Jan
I have used acrylic nail powder with...17 Mar
I have used acrylic nail powder with...6 Jan