C&P 10x15 rollers not rolling

Hi everyone,

I’ve finally got new rollers for my C&P 10x15 Old Style press.

They aren’t rolling along the bed rails! I’ve seen this mentioned here a few times, but was hoping to get some specific help.

The plastic rollers on each side are the correct diameter.

However, the double saddles on both sides of the roller holders are loose the pins that hold them to the springed rod are bent.

Would tightening up the springs be a next step or building up the rails?

Or! Do I need to refurbish the saddles so they aren’t loose?

Any advice is most welcome. Much appreciated!

Erik