About PaulM

image: PaulM's picture
Recent content
Pearl #1 ?22 May 17
double post sorry30 Nov 15
Morgan Line O Scribe30 Nov 15
build date for challenge tabletop proof press3 Apr 15
are treadle shafts symetrical?28 Feb 14
V-50 cylinder will not go off impression22 Oct 13
Motor mount bushing for Hammond Type saw16 Jan 13
PMS 7712 formula11 Oct 12
Windmill for sale: Atlanta22 May 12
Does anybody have a 10x15 Parts press?16 Aug 11
Recent comments
TitleDate ↓
are these wooden flywheels attached to...10 May
lot 21 on the May 18 auction 13 May
Jack Beall is located : ...12 Oct
1-1/8" fits my 8x12 New style. I use...15 Apr
I have 2 v50s and the pans are 4' x...10 Mar
Also remember that on a cylinder you...28 Jan
Panthera, We are in Richmond, Va...4 Jan
Can your blade sharpening service tell...30 Aug
try searching for printing press and...5 Aug
Hi Tarynn, The Visual Arts Center...15 Apr
We use bowling alley wax and only have...9 Apr
It could be the four or five jobs that...28 Mar
Thank you all for helping to confirm my...28 Feb
this pedal will raise the cylinder....6 Feb
The pin is disengaging so it will go...23 Oct
karissa, There is no feed board on...16 Oct
oops, my spell check must be...30 Sep
We use Owasso graphic at...30 Sep
I would also strongly suggest that you...30 Aug
Where in VA are you. I am in the...23 May
if you move the slugs be sure to watch...8 May
Last time I moved typecases I stuffed...12 Apr
when printing with four deckle edges I...4 Mar
The amount of packing will also vary...17 Feb
Could also be your roller pressure. I...10 Feb
I have my press, an 8x12 c&p, in an...4 Nov
Thanks, you are awesome. 11 Oct
Something else to consider is, that if...3 Aug
I have those flame driers on 2 V50's...5 May
It could still be an early C&P new...15 Apr
the imposing stone I work on is an old...29 Mar
When planning your cuts allow a little...23 Mar
The high spots are probably from when...6 Dec
The high spots are probably from when...6 Dec
Hi John, I am very interested in...20 Aug
I currently run two V-50s and a Miller...10 Jul
I have mixed oil and rubber often and...26 Jun
If you have an ink fountain on your...26 Jun
Jfitz, I had a similar problem with...23 May
I have used Pronto blanket wash...22 May