About chuck the printer

image: chuck the printer's picture
  • Member for 13 years 51 weeks.
  • Last access 9 years 25 weeks ago.
Recent content
TitleUpdated
Common Language24 Aug 11
Bakelite Furniture22 Aug 11
Ivory Faced Wood Type16 Aug 11
Bristol3 Aug 11
Claxton Chases17 May 11
press color28 Apr 10
Recent comments
TitleDate ↑
recently purchase a caxton 4X6 with 6...27 Apr
thanks so much for your response....29 Apr
ages ago i was in a letterpress shop...29 Apr
I have use "oil of wintergreen" as a...3 Apr
On each side of the frame there should...6 Apr
Don't really think you need drill rod...11 Apr
Some Champions of that era were...17 Apr
Over the past year I have read various...17 Apr
Don't know were locally is, but you may...20 Apr
Be careful with cobalt driers, you can...20 Apr
As I recall from "printing trade...21 Apr
Black ink for letter/offset in rubber...25 Apr
Try wetting the stuck parts with WD-40...3 May
How about a wee bit more information....11 May
Curious also what the need is for 100%...19 May
I somehow think that the really old...3 Aug
Both of the platemakers are for making...8 Aug
Other than painting it a darker green...14 Aug
Index can also have the same razor...14 Aug
I had them re-cast at a local vendor....14 Aug
Are you talking about the one with the...16 Aug
Face it, anyone can punch paper so hard...16 Aug
Thanks for the information, I'm sure it...17 Aug
If you're handy you can make the...20 Aug
Hello Pilgrim, About $15.00...21 Aug
If you do use the oil based inks, have...22 Aug
Didn't see the ad this time, but if...22 Aug
This is the reddish brown, just wonder...22 Aug
love the response, I too, will be a...24 Aug
Does that truck have ball bearings? Is...29 Aug
I don't have a dog in this fight, but I...2 Sep
No leg pulling, it works on white or...7 Sep
I would think that is the case. It...8 Sep
Face it, in offset, designers always...8 Sep
FYI - the Denver Xpedx stores do not...19 Sep
Uncoated stocks do not do well with...25 Oct
Geoffrey and Fritz are so right, I...26 Oct
almost posted twice.26 Oct
almost posted twice26 Oct
Try force drying several printed pieces...28 Oct