- Browse by category
Hi! I bought a C&P 10x15 last fall, and it had a Kluge feeder system on it. It also came with a large crate of parts for this feeder. We were able to remove the feeder from the machine once we got it home, but during the move from its previous basement home, the large vertical pipe that stuck up on the right side of the press was cut to allow it to fit up the stairs. We cut it straight and in a way that it can be clamped back together. There is a little green pump as well, and but the larger hose down there was old and I think I cut that as well. It was a long and complicated move for us. ;) We were careful to keep all parts we took off. Not sure if the system is absolutely complete, but the previous owner had kept everything in good working order, enough so that the press is still in good shape after last being run in early 1970.
I will never use this feeder system, I would just like it to go to good use and not scrap. The press is currently motorized, and I would like to convert it to treadle operation as I am a newbie to printing. I am located in West Michigan, near Zeeland. Please email if interested. Thank you!
