- Browse by category
Looking to get $3,500 for it all
I am selling my entire shop because the space owner is selling the building (and with my young kids it’ll be a while before I can run my business again).
This is the PERFECT setup for a fully functional starter print business. I have been professionally printing with this shop for ten years, primarily for wedding suites (you can look up my business at Pantherapress.com and see everything was printed with this shop). I’m open to fair offers. The shop is clean and orderly - no nasty old termite-filled junk or broken trash to sort. I am also willing to do a demo on the main press if needed. You can see instructional videos on my YouTube showing exactly how I work with and maintain the press making it perfect for a beginner as you can refer to the videos for exact guidance on taping rails, printing etc.). The only thing is I want you to take it all. I’m six months pregnant and do not have the energy to part it all out and cannot do more than supervise the move (first floor but may need the flywheel pulled to get it through the door or a dolly that allows you rotate it) The value is in the fact that it’s all ready to go - move, plug, and print. All you need is to order your plates for your next job and stick them on press. Every item you need is here!
Includes:
7x11” motor driven old style (110v regular plug) - it’s up on blocks, meaning it just needs a pallet jack to slide under or for someone to roll it out on a dolly - no scary tilting needed)
Boxcar base, multiple chases, excellent recovered rollers (Ramco did them), all oil, cleaning supplies, tape, lollipop gauge, extra chases, wax for maintenance etc.
16” Kuttrimmer (bought it new for $750) - in lightly used condition
Tabletop Hot foil stamper with added plate so it can be used with mag dies (it’s a little finicky but does work and I had a plate machined for it to allow you to stick on dies)
17” stack paper cutter
Lassco Corner Rounder with one die
Lead, some organized metal type, composing stick, lead cutters, palette knives, magnesium carb for thickening ink. Literally, if you can think of it, I’ve probably got it right down to the wrenches you would need to adjust or maintain every item in the shop.
All current paper stock and envelopes. Some cut to final sizes and even some edge-painted stock.
Full Pantone mixing set (oil based) along with gold and both opaque and transparent white, plus some extra tubes of metallics. Uncoated Pantone guide included.
Airbrush, custom-cut clamping blocks, and the basics for edge painting. Includes mediums, cleaning stuff etc - everything you need to begin edge painting
Small rotary gluer for duplexing (it’s motorized and has a hand crank option.
This is an amazing first shop that is ready to go. It’s all organized - see the video as well as videos of the equipment running. The shop has a large garage bay to allow easy loading, there is a slightly narrow hallway but it should be a pretty easy move.
https://www.youtube.com/watch?v=OaiqWhWMuSg
All the letterpress videos on my channel are showing equipment that comes with the shop. Everything is up, running, and good to go for a first-time printer right out of apprenticeship. Contact me with any questions.
The press
Organized dies and lead type
Corner Rounder and Stack Cutter
Precut stock and fresh paper stock - some is already edge painted in gold
Foil Stamper and some sample foil (also has heat gun, and accessories)
This is the model I have in shop
Air brush turn table, blocks, clamps, airbrush etc.
Lead, furniture, lead cutter
Ink, rollers, cleaning supplies etc.
Gauges, gauge pins, ink spatulas, glass ink plate, etc.
