I purchased this guillotine last year. A novice to bookbinding, I was told it was used to cut leather — not!! Need to sell. Appears to be in working order…. Asking... more
I am looking for a smaller press that I will be able to learn on. I live in South Dakota. There just aren’t very many presses available in this area. Any information or if... more
I have a 350 sq/ft. studio in a warehouse full of artist studios in West Oakland (on Mandela Parkway @ West Grand), right by the entrance to the Bay Bridge. This is a great... more
Hello everyone! I recently purchased a Kelsey 3x5 to restore as a little pre-printing project.
Unfortunately, I underestimated the difficulty in finding the chase piece.... more
I’m looking for table top print for learn more for letter press myself.
I learned letterpress at school and want to have more experience.
I’m in New York area... more
Selling a Kelsey Excelsior Model U 5x8 Hand Press in the North Texas area (will ship for additional cost). This press does not have good rollers, It does have a counter that was... more
I am looking to purchase a starter set of furniture [10, 15, 20, 25, 30, 40, 50, 60 = 8 lengths; 2, 3, 4, 5, 6, 8, 10 = 7 widths; 56 pieces total], reglets, and three sets of... more
Update - May 7: The response to this ad has been overwhelming. Thank you to all who responded. I cannot email you back individually right now. I am a home schooling mom who just... more
I am looking to move my C & P 10 x 15 on Tuesday May 12th, from San Mateo, to San Francisco. Moving from one garage to another. Both garages go downwards into a flat space.... more
We sold the Hand Press but we still have a Rosback Perforator (pat. Aug. 7, 1888) for sale please make reasonable offer. Any one interested can contact me at 724-523-6311 or... more
I have recently acquired an 8x12 C&P press and am currently looking for any metal type, metal furniture, or quoins I can find. If you have some of these items and are willing... more
I acquired a Kluge 12 x 18 that was converted to hand-feed, all except the crucial piece, the timing of the grippers. The necessary part is T-166 “Gripper cam hand... more
Chandler and Price Pilot New Actuator Handle
• Unbreakable Mild steel design
• Handle main body is primed and ready to paint (Handle in photo is Rustoleum brand Gloss... more
Chandler & Price manual paper cutter with lever handle and a bed 19” wide and 25” long. Mounted on thick particle board, which you can also have (if you unbolt it... more
wanting to get started in letterpress, and am interested in a tabletop or proof press. i live in SE wisconsin and am willing to drive a few hours... more
.thumbnail.jpg "Zoom image")
