I have acquired a substantial quantity of 36pt Massey Initials from M&H Type, but only F-Z. This is a long shot, but if anyone has extra of A-E, I’d love to trade. Or... more
I’m looking for a reasonably priced Kelsey 5x8 press in decent condition. Please, no trainwrecks. I could also use furniture and some miscellaneous supplies. Please get in... more
Wanted: Chinese/Taiwanese type and/or in-depth history about Chinese movable type.
I am a printmaker/book artist currently located in Cambridge... more
Looking for a 10x15 press, motorized or treadle. I don’t mind fixing it up or rewiring. If you have something in the back of your shop you aren’t using anymore or that... more
Hi everyone,
I am restoring a C&P 7” x 11” Old Style press from what I understand 1905 (Serial# A21) for the Willowbank Heritage Village in Wakefield... more
Hello all! I’m on the hunt for some wood furniture and reglets for my Kelsey 5x8. There’s only about 1/2” to fill between the chase and the base, so not much is... more
Hello,
I am searching for a smaller/lighter treadle-powered platen press, preferably in the Mid-Atlantic area. I would like a press that is less than 1000 pounds that I can... more
Greetings!
The Lark’s Nest, a 501(c)3 arts and trades center located in Dade City (central), Florida, is in search of a a proof (proofing) press to add to our print... more
I would love to find a C&P Pilot in good condition, with at least one chase and good rollers, ready to print.
Can pick up in the Midwest between... more
ISO the parts that make the ink disc turn on a Golding Pearl No. 3. That would be a lever, arm and pawl. Alternatively if anyone would be willing to... more
I am searching for a used Daige Maxit Adhesive roller. Daige went out of business in the last few years. I haven’t been able to find a Maxit or a substitution, so I figured... more
Looking for a 6” X 9” Deep Relief Base, Henry Gage Pins, Line Gauge, Quoins, Roller Gauge, Ink, Etc. in the Texas or surrounding area if possible.
more
I have a green 10x15 Kluge open press with the (17”) round ink plate that I would like to replace. Looking for a source of Kluge parts, thank you!
more
RSS feed
