About RMG

Recent content

Title	Updated
Article on Goudy (1942)	18 Mar 10
Font identification	22 Oct 09

Recent comments

Title	Date ↓
Crystal, Boxcar "recommends" a 3.5...	15 Feb
I understand your enthusiasm, but it's...	12 Feb
I haven't used my Adana for die...	30 Jan
Are you going to focus on using type...	30 Jan
I have a small device with a handle...	28 Jan
Are you using hot pressed or cold...	2 Nov
Have you tried dampening the paper?	1 Nov
What happens if you flip the saddle...	6 Sep
I would follow Dickg's advice (you can...	28 Jul
Here is a wonderful site of someone who...	21 Jul
There may be a set screw holding the...	25 Jun
Maybe you just need to turn it so it is...	25 Jun
If you are getting a good clear print...	19 Jun
Karinina, If you are able to, post...	15 Jun
I respect Devils Tail, DickG and...	12 Jun
Jessica, if you look through past...	12 Jun
Cody, If you get the ink plate shaft...	23 May
At any big-box hardware store you can...	4 May
We use a co2 laser cutter for making...	30 Apr
It sounds like you have a clear idea of...	19 Apr
How nice of you to offer to share your...	16 Apr
Looks like...	17 Feb
Using mineral spirits should not be a...	30 Jan
A printing press plays a pivotal role...	24 Jan
Jamie, Until you get a new part, you...	16 Jan
I guess what I meant to say is that...	12 Jan
Make sure that you are using the...	12 Jan
Have you seen this video of Crane & Co....	18 Nov
In your last picture it looks like the...	24 Oct
Thank you for your very informative...	24 Oct
You still have quite a bit of adjusting...	24 Oct
The trucks (the black wheels on the...	23 Oct
In the hardware store there is a...	22 Oct
Print on any paper you like and put...	31 Jul
Sounds like you've got skills and have...	13 Jul
There is is a hex screw on the end of...	26 Jun
This should help you...	25 Jun
anaderoux, On the Adana 8x5; instead...	25 Jun
hi Cocadinha, That looks like a very...	20 Jun
In the third photo down: it looks like...	16 Jun