About century printer

image: century printer's picture
Recent content
TitleUpdated
8 x 10 Chandler and Price platen press and...20 Feb 16
chandler and price presses 8 x 10 and 10 x 15...19 May 13
Recent comments
TitleDate ↓
you could use crystal clear in a spray...12 Oct
I just use a piece of stainless steel...19 May
I would suggest washing up and re...19 May
sure paul, if the shoe fits. I...10 Jun
paul-it has worked for me for two years...9 Jun
always check to see if the rails are...7 Jun
everyone has their own method, but mine...7 Jun
skip the soy inks, oil based prints so...6 Jun
check the rails to see if they are...19 Feb
skip the typan, that will not give you...11 Jan
it will run the thick lettra 220 no...17 Jun
you can get very fine lines with the...17 Jun
Funny, I was moving a c&p 8x12 just...16 May
I am in the process of restoring some...9 May
Looks like a nice 8x12 old style!...6 May
I once heard that someone was using a...30 Mar
I completely agree, I would just cut...30 Mar
There are many ways to do everything it...28 Mar
I do agree with the above comments. And...28 Mar
rollers should be replaced every 2-3...27 Mar
I will tell you that I firmly believe...27 Mar
very interesting. I can tell you...27 Mar
I am a little curious about theses...25 Mar
Winking cat is right, the trucks and...16 Mar
You are really worried about spending...16 Mar
There is a step by step proccess to...13 Mar
And glue or tape them down securely to...13 Mar
-here are some pics. The cool thing is...13 Mar
I am glad that you didnt buy the other...10 Mar
It wouldnt hurt to have a smaller base...10 Mar
to figure out what size base is a good...10 Mar
You are definately right Fritz, uneven...7 Mar
You can make some pins out of...4 Mar
Yes, BarbHauser is right. Larger areas...4 Mar
It may be possible that you are either...3 Mar
I will have to try the veggie oil. I...3 Mar
from the pic posted I can tell you that...26 Feb
From my experience, this type of press...24 Feb
It works great for putty knives...23 Feb
I have used everclear alcohol for...23 Feb