About rebpow

image: rebpow's picture
Recent content
TitleUpdated
Press identification: old series C&P 20 Dec 21
Die cutting 166lb or 314lb Neenah Wild paper26 Sep 18
Dark grey paper10 Feb 11
Need a gripper bar mount for platen press!12 Oct 10
Reb Peters Press29 Dec 09
Troubles with printing on thin paper22 Dec 09
Ink transferring to tympan even when impression...22 Dec 09
Questions from someone starting a letterpress...13 Nov 09
Black paper source18 Sep 09
8 point and 12 point spacing material needed31 Jul 09
Recent comments
TitleDate ↓
Ahhhhhh! That totally makes sense....21 Dec
@BComstock: Thanks for letting me know...21 Dec
Here is the chart I have where the...20 Dec
Thanks Eric! I'm going to buy some...4 Oct
Thanks for the recommendation on the...3 Oct
I'm late to seeing this post, but I...3 Oct
You guys are wonderful! Thanks so much...15 Oct
An update: I raised my platen so that...29 Dec
You are all wonderful! Thanks so much....23 Dec
I only use oil-based ink, but I'll try...22 Dec
The platen is level as it was before I...22 Dec
Thanks Inky. I'll definitely take a...22 Dec
Thanks for you advice jfitz. I hadn't...30 Nov
I put out a survey (via...27 Nov
Thanks so much to everyone who filled...23 Nov
Thanks everyone! -Reb4 Oct
Noah is a wonderful gem who set this up...19 May
Thanks Brad! I was planning to use the...11 May
Thanks for the info. Very helpful....7 May
Thanks! That's exactly what I needed....5 May
Thanks for the info Paul. Mine does...5 May
Here are a few pictures. 5 May