About jfeltz

image: jfeltz's picture
  • Member for 13 years 18 weeks.
  • Last access 9 years 2 weeks ago.
Recent content
TitleUpdated
Type casting19 Oct 16
Windmill parts21 May 16
Ink fountain on a Windmill16 Mar 16
Factory Windmill foil parts10 Mar 16
Windmill side gauge/pin8 Feb 14
Type prices?17 Dec 13
Jupiter and Juno5 Mar 13
Recent comments
TitleDate ↓
Fritz1, I also would be in on all...11 May
I prob would take a galley cabinet or...10 May
Good thoughts Frank and Haven,not sure...8 Mar
I have mine set at appox, 12'' from...17 Jan
Is this Jeff? Feel free to message me...12 Jan
western411, please do!28 Sep
That looks like the correct OEM...27 Sep
You will need a 220 outlet. Check if...16 Sep
Also, where are you located? I shipped...16 Sep
Unless you can pick that one up for...16 Sep
Zellerfish, Did you try the vacuum shoe...8 Sep
Bill, It's in the "New and Improved...29 Aug
Here is a pic of it. It makes contact...19 Aug
I have a V50 that was made between the...19 Aug
I would love some Syn-tac's for that...7 Jul
Do you have cores dwallen? for $76...6 Jul
isaboa, Haha, I wouldn't of duked it...6 Jul
Yep, you have a piece that has broken...5 Jul
isaboa, I bet the one you missed out on...5 Jul
Not sure what you have going on. I use...21 Jun
All three of my windmills have a static...21 Jun
lyools4 is him I think.18 May
The Arm, unless things have changed...16 May
Yep, same thing here. Wanted a money...16 May
You have a long road ahead of you of...27 Apr
Also don't forget about the filter that...20 Apr
I haven't had any luck with white...8 Apr
Sounds like the set up isn't too bad....16 Mar
Any updates?10 Mar
b.biroscak I guessed on the serial...10 Mar
phansbarger and b.biroscak both of my...9 Mar
Without feeding stock the press will...7 Mar
In the pic 8768 that long black thing...1 Mar
Ericm, these units do not spin...29 Feb
I do think it maybe a fine tune for the...29 Feb
How is the fold not consistent? I have...27 Feb
Also mine has the same LMC heat...27 Feb
My press guy may know. He told me he...27 Feb
Are you using OEM grippers, or...24 Feb
Hello17 Jul