About OnderkastPress

Title	Updated
Rail tape - The war	18 Jun 14
Roller frames riding too low	4 Jun 14
Pittsburgh: Want to Buy your C&P	2 Jun 14
Paint for Press - Gen. Inquiry	18 Apr 14
Cleaning a Challenge Advance	9 Apr 14

Title	Date ↓
Let's not confuse Henry Ford with a...	11 Jun
Inky is onto something - That looks...	10 Jun
It's likely they are the same size...	6 Jun
DGM - I didn't even have the rollers on...	6 Jun
It was that simple. Flipping the...	5 Jun
Fantastic. I think the only way you...	4 Jun
The throw-off saddle was never removed...	4 Jun
Looking through - I believe the back...	4 Jun
I'll chronicle this here, just in case...	4 Jun
Have you oiled it since you received...	3 Jun
IMO - The Chases are cast steel and...	2 Jun
Oiling, cleaning and try and get some...	2 Jun
Winking Cat, like the impression...	28 Apr
I may of been misunderstood. My advice...	25 Apr
Like a car, or any other antique;...	24 Apr
You have an intellectual right to the...	21 Apr
I'm checking it out now! Thank you...	21 Apr
I always used a few slip sheets of...	18 Apr
AH HAH! ;) I figured you had access...	18 Apr
Putz Pomade is a good one I like. NA...	18 Apr
Looks like cupping of the plate, but...	18 Apr
Why not use a coated paper and an oil...	10 Apr
An arbor press that is big enough would...	10 Apr
Sounds like bowling alley or car wax it...	9 Apr
Thanks DGM. Makes a great deal of...	9 Apr
I'm doing a Model U now, just finishing...	9 Apr
C&P's are beautifully simple yet fickle...	9 Apr
Agreed. Way too much ink. Roll...	9 Apr
I agree with heating the cam with an...	8 Apr