Older “Black Ball” unit.
220 volt single phase. Perfect for a garage shop.
3 chases, furniture a few quoins and key.
I can deliver in So. Calif area... more
I’m looking for a Golding Pearl No.11 somewhere near Washington or Oregon. I live in Seattle but am moving to central Oregon and would prefer to pick something up in the... more
Have a 1913 Chandler & Price press, a 1900 Chandler & Price press, a 1907 Chandler & Price paper cutter, a Intertype (poor cobndition) ,and a foot operated Rosbach... more
This Challenge paper cutter is in great condition and has barely been used in the few years that we have had it. We will also include a replacement blade with the purchase.... more
I’m looking for parts for a heidelberg windmill 10 x15, including:
- a 10 x15 chase
- all 4 rubber rollers or just the cores
- trucks and bearings needed... more
Vintage Guillotine style manual paper cuter in very good condition. This cutter is working order.This model may be from 1891 and 1903. Pick up only it is ground level, needs to be... more
Need a chase for my Sigwalt press it should measure 6x9. If you have knowledge about Sigwalt please contact me for need to know what kind of Sigwalt I have.
more
Up for sale is a restored hand operated 10x15 Press. Everything you need to print. Press is conveniently located in a shop with forklift access.
Here’s what’s... more
We are a small not-for-profit printshop and artists studio in Indianapolis. We are in desperate need of a drying rack, shelves should be able to fit at least 22”x30”... more
The third Type on the Cob (and fifth Ladies of Letterpress conference!) will take place September 14-17th, in Mt Pleasant, Iowa. This year, we’re happy to present... more
For sale: Chandler & Price Table Top press. Purchased in 2005 from Dave Churchman in Indianapolis, who restored it to perfect working order! It has been unused since and... more
10x15 and 12x18 C&P presses will not make the trip to our new location. Pick up in Connecticut. Also have a heavy steel cabinet for holding composed jobs, 3 Linotypes (2... more
Entire letterpress shop:
1927 vintage 12 x 18 C&P with Kluge auto feed. Print and diecut. Very good running condition, decent rollers.
1910 (I think) 8 x 12 C&P hand fed... more
Hello Everyone!
I’m looking for some who can provide hot foil stamping services for my stationery business who is relatively local. I’m located in Monroe... more
Restored to “like new condition” with new feed/delivery board,
mounted on an Oak wood base, new rollers, one chase and “print tested”
ready for project... more
Wanted: a reglet cabinet and reglet for Quoin: Community Print Studio I am starting in Bozeman, Montana. The attached photo is an example of what I am seeking. Thanks for your... more
