I have a Pilot Clone that was made by/for American Printing Equipment Co. and imported from West Germany. This is a naked press and I need a chase, trucks and rollers.... more
I’m looking for a Flywheel and a Gripper Bar for a C&P New Style 14” x 22” (1925 or 1926). Not positive about the year because I couldn’t find the... more
Legacy of Letters is a lettering tour of northern Italy (from Parma to Venice) from June 29 to July 10. It includes visits to libraries to look at the printed books of Nicolas... more
Virgin Wood Type in association with the P22 Type Foundry announce the release of a completely new wooden version of the Czech Modernist font Preissig Scrape.
Read about the... more
Hello, I’m looking for a tabletop press in good working condition for a reasonable price. Either a Chandler & Price Pilot or a Sigwalt (at least 6x9). If you have one... more
Looking for a Vandercook Press to be used by an artist. Hoping for a table top press that can take a 24 x 33 inch piece of paper that is inked by hand. Please let me know if you... more
Hello! My husband and I are new printers in Nashville. We’ve been working on a Vandercook.
So far we’ve only done linoleum cuts. However, we have some projects... more
I have about 25 old presses,parts and much more.
This was a 100 years old printing plant.(the Lehman’s brothers printing plant)at New Haven,CT.
C.R... more
I have acquired a Ludlow and about everything that goes with it. I don’t intend to use it so I need to get rid of the Ludlow, Universal Mono Tabular, Ludlow super surfacer... more
I have about 100+ lbs of mixing colors. All in sealed 5lb cans, never opened. I would like to sell as all one lot, but may consider breaking up. $4 per pound o.b.o
Buyer... more
I am looking for two letters from Elite Monogram 48pt.
I need two letter P (pictured) and one letter G. I would like to finish my set and will appreciate if you have spares!... more
I am looking for a set of roller saddles (the saddle that holds two form rollers) for a C&P 10x15 that have the small diameter receiver on top for an oscillating rider roller... more
Hi folks, looking for a heidelberg windmill 13 x 18, for some reason I never seem those listed anywhere. Hope someone can help. Thanks in advance.
more
Our book/print area has an excelsior 11 x 16 hand press with it’s base. We need the two -piece chase and back plate with roller bearers and two rollers/or roller cores to... more
I’ve fallen in love! I’ve been researching table-top presses and I would love to have one. I would like a Sigwalt, but I am open to suggestions. My goal is to expand... more
I am looking for a working C&P Pilot letterpress. I am located in South Dakota, but am willing to travel quite a distance to pick up a press. Please contact me if you have one... more
Seeking an experienced letterpress operator for contracted work. Would require that you stock the paper and ink, I supply the envelopes and plates. We are located in Mississippi... more
Been in letterpress for almost two years and looking to become serious with a Vandercook. I’m hoping to stay under or around $2,000. If you’re getting rid of one for... more
Hello listers,
We’re looking for a long-style ink fountain (complete with mounting brackets) for an O.S. 8x12 C&P. Will also consider a long-style + pony combo as... more
A lock-up bar for a flat bed Challenge proofing press which is 15 1/4” wide. The press did not come with one. This is for a retrofit for a registration system. Thanks.
more
Seattle Letterpress Gallery now seeking artists to host Letterpress Art. Broadsides, small prints and other ephemera are up for review. For further information please inquire... more
Hi! I bought a C&P 10x15 last fall, and it had a Kluge feeder system on it. It also came with a large crate of parts for this feeder. We were able to remove the feeder from... more