Wrenches to adjust the adjustable roller trucks on Chandler and Price 12x18. I imagine they would work on 12x18 Kluge too (?). 1 1/2” wrench. As you may already know, a... more
Three 12” line gauges, one L612A with 6/12 pt and 8pt on one side, inches and 10pt on other,. Two L612-12 s with 6/12pt/inches on one side, 6/12 and agate on the other. $6... more
I have just acquired some parts from two Model 6 Little Giants. The photo is a sample of small parts like sheet rollers, feed suckers, the pile height adjuster, chase hook, tail... more
One-on-one tutorial, hands-on with Heidelberg 10x15 windmill platen press.
Also, if desired, basic typesetting including hand-set and/or computer layout, using Apple Pages... more
Antique Chandler & Price 12 x 18 new-style platen press, has been used to support a letterpress stationery company since 2007. Includes rollers and Boxcar base for printing... more
As pictured below for sale by set, or as a lot. Shipping available at buyers expense or may be picked up.
Set 1: Letters, numbers, & punctuation. 120 pieces, 144 point type (2... more
C & P 12x18 still in working order, used for die cutting, but can be used for printing on vinyl or cardstock. Good running 115 V.A.C. Variable speed motor, well maintained... more
Wood block letterpress set contains alphabet, numbers, and punctuation. Block is 144 points. Can be shipped at buyer’s cost or picked up.
We’re asking $275 obo.
more
Selling a Chandler & Price Printing press. 8 x 11. I am also selling 2 cabinets full of printing type, woods, leads and slugs, 2 chases, file cabinets, slug cutter, steel... more
This is a Hammond Easy Kaster that is a smaller duplicate of the Kaster we have connected and working in our printing museam. It was not connected when I took over rejuvinating... more
This Advance paper cutter is a 25 inch size and was made by Shriedewend and Lee Co. It is 42”W x 64” H x 48” D.
The right structural leg was cracked and... more
Apprentice Wanted:
Looking for young, smart, creative individual to learn the almost dead art of letterpress, everything from foil stamping, diecutting, crash numbering... more
Looking for any type of Vandercook proof press, would prefer an electric floor model. Can be in any condition, I wouldn’t mind a fixer upper. Located in Kansas City but am... more
I am in search of a table top proof press. I would prefer one that has a printing bed 12x12” or larger and has grippers for registration. Thank you!
more
This Chandler Price Lever Paper Cutter 26” is in excellent working condition and comes with a total of 4 blades. It’s serial number is S746 which according the... more
I am selling a completely restored Kelsey 5x8 tabletop press and a 3x5 press. The 3x5 isn’t completely restored but does have brand new rollers.
I also have tons of wood... more
Hamilton Commercial Imposing Table - All Steel with polished Iron top 39”x65” with 105 steel galleys 8-1/2”x11”, some metal furniture and 14 drawer slides... more
I am very interested in buying a Chandler and Price 10x15 or a Heidelberg windmill press in good condition.
Just getting into letterpress printing and would like to have a bigger... more
I am looking for a flat faced pulley for my motor like the one in this photo. The one in the photo has a diameter of 4” and the pulley face width is 5”. I would also... more
.thumbnail.jpg "Zoom image")
.thumbnail.JPG "Zoom image")
