About natron

image: natron's picture
Recent content
TitleUpdated
Vandercook #4 Proof Press - $1200013 Sep 16
Heidelberg Windmill 10x15 - $78402 Sep 16
Heidelberg Windmill 10x15 Press27 Mar 15
Inconsistent inking on Windmill23 Dec 11
Recent comments
TitleDate ↓
I think $1200 would be a fair price, if...10 Feb
I was having trouble getting to the...9 Feb
The current standard Pantone book has...7 Feb
Check...7 Feb
I have lots of rubber based inks that...25 Jan
I am with you. Do the final trim, make...25 Jan
The Reich Savoy is very similar to...25 Jan
Peter, I agree completely, perhaps my...23 Jan
I run a Vandercook, and have been doing...23 Jan
Thanks for all the input so far, it...25 Dec
thanks for the input. The rollers are...23 Dec
kind of late getting in on this one...1 Dec
It can also depend on your location. I...28 Nov
I use Citra Solv, and usually cut it...3 Nov
When did everyone on Brairpress turn in...2 Nov
With the 220# you should have a pretty...16 Sep
My experience with them has always been...16 Sep
Oh, and I always try to run my...20 Aug
I can usually flex or "work" the stack...20 Aug
I agree, I bought one recently in good...11 Aug
Good advice from the above. I just gave...3 Aug
We had this happen once, with rollers...3 Aug
I don't think you will regret it. yes...1 Aug
From the photo, it looks like the feed...31 Jul
Do plenty of research and don't rush in...31 Jul
Part of it is deciding whether you are...28 Jul
I just spent a load of time figuring...28 Jul
I can't imagine paying more than...28 Jul
I have also moved my #4 one too many...28 Jul
You need to run numbers, as has been...2 Feb
It does seem a bit awkward to look at...15 Nov
The price can vary a lot, but the...12 Nov
I try to wear a mask whenever i use CA...29 Oct
Don't know much about mineral spirits...28 Oct
When you say you are not getting a good...6 Oct
Logos Graphics in SF makes...27 Sep
I agree with Dave, that more specific...30 Jul
We have been using some from these...30 Jun
we have the Micro Cut on our Polar Mohr...30 Jun
we order little tin cans that people...29 Jun