About ohsotoxic

image: ohsotoxic's picture
Recent content
paper cutters12 Jul 17
paper choices26 Jun 17
another one - inking issue15 May 17
Furniture, Quoins, Keys7 Apr 17
Ink Recommendations27 Mar 17
Chase Base Question and Gripper Arms8 Mar 17
Cracked / Severed Foot on Golding Jobber #627 Feb 17
Flywheel on the Golding Jobbers20 Feb 17
ink sources in northern VA16 Sep 11
brayers and hand inking1 Aug 11
Recent comments
TitleDate ↓
had my stock cut by a local print shop...17 Jul
Hi Mike thanks for your answer on that....13 Jul
the attached image is the machine I...13 Jul
so the machine I have has a "floating"...13 Jul
For reference, I BELIEVE this is what I...12 Jul
thanks for the offer steve, it would be...12 Jul
thanks Brad for your insight. I watched...12 Jul
this is an old thread, but I learned...29 Jun
deleting double post.28 Jun
thanks :) i purchased some lettra and...28 Jun
thank you HavenPress, I was on there...26 Jun
BTW - I understand this has been...26 Jun
Thank you, I will try less ink...12 Jun
I am using photopolymer plates from...9 Jun
Geoffrey, the main issue with my prints...7 Jun
attached is my print from last night...6 Jun
I am having this same issue with 2...6 Jun
Thanks everyone for your insight. I...17 May
here's another, closer view.15 May
HavenPress, that is what I thought. The...31 Mar
Thanks for the suggestions everyone....30 Mar
Hi everyone, so my machinist stopped by...17 Mar
John Henry, There's 2 roller hooks...10 Mar
Hi all, thank you for the help. Yes, my...9 Mar
Well, I am also looking for the...8 Mar
Hi Inky, It may not be less...8 Mar
And if it comes down to brazing vs....1 Mar
Hi Marshall, thanks for your insight....1 Mar
Thank you. That makes me feel a bit...28 Feb
Hi all, still looking for some expert...28 Feb
Thanks, I am searching now, I just need...27 Feb
Hi Ken, thanks, I'm pretty sure I have...21 Feb
thanks for the info. i will give them a...19 Sep
DickG, I thought about doing this and...1 Aug
alright, so i think i am going to buy a...31 Jul
Yes, inky, I agree, it is very nice to...27 Jul
That is my only option? I have...26 Jul
Tom, I am in Virginia. And I am pretty...26 Jul
Bob, just to clarify, I can't even see...26 Jul
Okay, so I got the pin out. I posted a...26 Jul