About Finger_Print

Member for 9 years 4 weeks.
Last access 47 weeks 6 days ago.

Recent content

Title	Updated
Iron Hand Press tympan covering materials	2 Jul 25
Densitomoter-transmission type	15 Dec 21
Etching Press used with relief forms	5 Apr 19
Kimble Motor-Friction Drive-Making it work.	26 Nov 18
Etching press Forums	22 Feb 18
Maximum size of Boxcar base for C&P 10x15	8 Sep 17
C&P NS wavy roller rails	7 Jun 17

Recent comments

Title	Date ↓
Bob, are you using the Stix-It...	3 Jul
It's great to see so many options...	3 Jul
My press came with a felt/wool blanket...	13 Mar
Public, If you all get the figured...	17 Feb
Larry, I sent you a couple of messages...	15 Jul
Love it! One should be included with...	26 Mar
I can totally see this being used as a...	25 Mar
I think that I once came across a...	16 Dec
Try to use a case builder that has...	13 Sep
Try to use a case builder that has...	13 Sep
Thank you everyone for the great...	8 Apr
In the book "Printing on the Iron...	5 Apr
Appreciate the verification on the...	23 Oct
Appreciate the verification on the...	23 Oct
Not a Heidelberg person, but that looks...	23 Oct
Appreciate the thought. Hard to read....	18 Oct
Good news in troubled times. Fritz, it...	8 Oct
I have seen a similar product at a...	30 Aug
I would suggest a split-tone so to keep...	22 Aug
Any wheel that is not steel will always...	2 Aug
I am going with Bill on the pallet...	1 Aug
Looks like a surface top for being able...	26 Jul
So, I noticed on photo 5609 that it has...	24 Jul
Next addition could be an oscillating...	23 Jul
You may go to your local hvac or...	10 Jul
I noticed that the first horizontal...	3 May
Seems as though I remember reading...	5 Apr
I recently learned that if you use a...	4 Apr
Unless I am missing something, (as a...	29 Mar
Thank you for the suggestions.	23 Feb
	22 Feb
My first press was an offset web. Built...	22 Feb
Same problem here.	15 Nov
You may find an inexpensive pair of...	6 Nov
My main take away from your comments...	11 Sep
My wife will be working in the...	11 Sep
Thank you for answering the "Stones"...	26 Jun
" You must cure the cause and heal the...	9 Jun
Thank you for all of the feedback....	9 Jun
Mike, Just checking in to see how...	6 Jun