About jnbirdhouse

image: jnbirdhouse's picture
  • The Birdhouse Press
  • Member for 15 years 20 weeks.
  • Last access 1 week 6 days ago.
Recent content
TitleUpdated
Pearl No. 8 Parts Available24 Sep 26
Cartoon Cuts1 Jan 20
Milling cutter for Rouse Miterer2 Jun 19
Hammond Ben Franklin TrimOSaw16 Apr 18
Restoration of Reliance Midget hand press13 Nov 15
Pantograph-router identification6 Mar 13
Recent comments
TitleDate ↓
I had the same issue with our Hoe...4 Nov
There is an article from the Guild of...4 Oct
We have a different model of Kutrimmer...4 Oct
You could try...21 Apr
We have a Hopkinson & Finsbury Albion...30 Oct
Attached are some photos of our...25 Apr
In the first photo, isn’t the brass...23 Jul
Kim, As best as I can measure ours...3 Dec
These look similar to the four pieces...1 Oct
You might try a company by the name...7 Feb
Frank, Thanks for all the photos....5 May
Frank, Thanks for the photos, they...27 Apr
parallel_imp, I removed the pin and...21 Apr
I have been successful in freeing the...19 Apr
Thanks, Frank. The photos would be...18 Apr
Photos of the bar17 Apr
From the accessories list, I found the...17 Apr
I have a related but different issue...20 Dec
I am getting ready to have a couple of...10 Feb
Greg S, Thanks for the insight from...15 Dec
We have a few parts for an 8x12, if...12 Sep
You might try checking with this...27 Jan
When we were refurbishing our...21 Oct
We encountered a similar issue while...29 Aug
I was looking at some old Challenge...17 May
We were able to do it on our OS 8x12...28 Feb
We have a C&P 7x11 press. I don't know...26 Feb
This seems to match Perpetual Calendar...15 Feb
We replaced the motor on our #4 (s/n...21 Jun
We had a shaft break on our C&P 7x11...3 Feb
We recently purchased some Van Son inks...4 Nov
We also suffered a broke shaft on a C&P...8 Aug