- Browse by category
Need all inking parts + extras for a 10x15 New Series C&P. Press was stripped for a foil stamping set-up in a previous life, all parts lost.
I’d be willing to discuss trade of the entire foil stamping rig in trade + $$ from my end.
Ideally, I’d find a parts press within 200 to 250 +/- miles from Vancouver, BC, a press that may be getting junked due to a serious fall, ie: breaks in main castings, side arms, shafts, flywheel, etc but with inking parts intact.
Otherwise, here are the parts I would need:
– 7 & 9 or 7 1/2: double or solid disc
– 8: disc bracket
– 10 + 10S: small disc gear + screw
or…
– 11 + 11S: large disc gear + screw
(depending on 7 & 9 or 8 disc above)
– 36 + 37 + 38: disc lever/roller/pawl
– 39 + 39 1/2: R & L double saddle
– 39P + 39 1/2P: R & L saddle pins
– 40 + 40-E: single saddle left & right + springs
– 43D + 45D saddle studs
…for good measure
– 80 + 81: L & R gripper/bolt/nut
– 19A + 19T + 20: feed table base + gear guard/thumb screw
– 20: feed table fork
– 24: treadle
– 44 + 44P: treadle hook + pin
Previous owner really did a number on this otherwise great shape press! :(
Here’s a link to a couple of C&P parts list and specifications documents:
https://www.dropbox.com/sh/4bmoz5ob36c9qci/AACyNJpWnB2AEJZ25oxD5Do-a?dl=...
- -
Short of an entire press with the parts listed above (preferred), please let me know what you may have in your spare parts pile.
