About Frank Underwood

image: Frank Underwood's picture
Recent content
TitleUpdated
Pay Pal7 Nov 15
Recent comments
Title ↑Date
A combination (equal parts) lemon juice...4 Nov
A half-horsepower is generally the...27 May
A "broken font" is one with one or more...25 Oct
A "broken font" is one with one or more...25 Oct
A-a-a-Men!!!!! Frank.13 Feb
Amanda: Where in Lakewood is this group...14 Dec
Amen.17 Apr
An old series Pilot does not have a key...9 Mar
And, in addition, this press doesn't...8 May
And, in general, the packing should add...7 Apr
AND, on any small tabletop press, put...9 Mar
Another point to be made is that a...14 Feb
Apparently, all that you need now is...17 Dec
Be sure that the bushings that the...11 Jun
Before you do anything else, check the...29 Oct
Bernhard Gothic Bold. Look below the...21 Jan
Brass rule would be better, because...11 May
C&P Craftsman presses came with a...24 Jul
Caslon Condensed (or M3dium Condensed)....28 Jan
Chase screws on ANY press's chases are...19 Oct
First, check the ball bearings to be...15 Mar
Halftones of any kind work best on an...9 Jun
Has this face a pinmark? If so, then...5 Apr
Heater hose is good -- and cheap....2 Aug
How large is it? Frank.9 Sep
However, this is an enlarged copy in...18 Apr
I like your studio. Neater than my...14 Mar
I stand by my statement. Go measure the...23 Dec
If in fact the impression is soft on...8 Apr
If you know which way the driven pulley...24 Mar
If you know which way the driven pulley...24 Mar
If, on one of the gripper bars, the...3 Sep
Is the throw-off on nice and solid? And...10 Feb
It looks to me like it might be...29 Apr
It was usual for the makers of wood...13 Jan
I'd try another brand of opaque white....30 Apr
Magnesium alloys do this, if there...16 Nov
Maximum figure size on a type-high...31 Jan
Most common place for a break on a C&P...15 Jan
Nope, ain't Melior. Herman Zapf drew...23 Aug