About jim jereb

image: jim jereb's picture
  • Member for 16 years 41 weeks.
  • Last access 1 year 19 weeks ago.
Recent content
TitleUpdated
iron hand press pressure1 Mar 23
wood type ID17 May 21
14 point Times New Roman22 Feb 19
Metal type ID27 Apr 18
Wood type ID19 Mar 18
wood type ID10 Apr 16
type identification20 Oct 13
Type identification20 Oct 13
durometer choice22 Aug 13
Help in identifying a type face12 Apr 13
Recent comments
TitleDate ↓
My first Hamilton metal type cabinet is...10 Apr
Yes, use very little pressure and very...15 Mar
Just one thing to add, hinted at by...9 Feb
Some papers will mold more readily than...3 Aug
Whoops! Sorry, my two photos are in...17 Jul
Here is one method of connection for...17 Jul
For this reply just simplifying to...24 Jan
Check out a short You Tube video by...29 Oct
Many people on this site recommend...23 Jul
I have not seen an oiling chart myself...26 Jun
Just an echo of what Steve G. posted: I...1 Jun
Thank you Dave! This information is...18 May
Once upon a time I sorted through an...30 Oct
Just quoting from the Rob Roy Kelly...22 Oct
What amount? You described the press...22 Mar
If the press has not been used for some...22 Mar
sorry, two posts22 Mar
Yes, in full agreement with Mike from...14 Feb
I have heard them called the ball &...23 Jun
It can be done successfully depending...7 Apr
I have used J. E. Moser's brand Epoxy...12 Feb
Thank you for the update and am glad...7 Sep
"Electrotype" was the word I thought of...28 Apr
Thank you all for such accurate and...28 Apr
It might be best to proceed with just...21 Mar
Thank you Dave! Very helpful...20 Mar
Bob is correct in that the supporting...29 Nov
At a glance it appears to be Lydian...26 Feb
Hello, I have, over the past few...4 May
Hi Mike, I would be happy to send...17 Apr
Rick, A good proposition! If you...14 Apr
Hmmm. Distortion from the repro....14 Apr
Thanks Rick and others who have written...13 Apr
Just echoing the above suggestions in...13 Apr
Hello Briar Press members. To help...13 Apr
All this input and information is very...11 Apr
Hi Rick, Thank you very much for the...10 Apr
I have heard/read about aluminum as a...7 Apr
I recommend the thicker of the two...7 Apr
I don't know what the first...28 Mar