Dick and Jane Letterpress is a family-owned and operated print shop in Saint Paul, MN. We are seeking an experienced letterpress operator to join... more
I’m looking for parts from an older (pre-1960) style 12x18 Kluge vacuum pump— specifically the pump leather expansion spring, along with the pump leather piston and... more
Oldie but a Goodie - this is a Challenge “hump back” Paper cutter. The bed is right in the neighborhood of 23” wide. The cutter will plow through approx... more
I have a really nice Challenge model proof press here on the shop floor. We don’t use it much these days so we’ve decided to pass it on to someone interested in diving... more
We have several galley cabinets, type cabinets, and type drawers available. Wood or steel type cabinet: $300 each. 4 wide galley cabinets: $200 each. Single galley: $100 each.... more
Wright Combo Press for sale in Mpls. . 27 x 48” bed.
Works for litho and intaglio printing. $900 obo.
Helping a friend clean out and close down her studio, so no... more
Hello Briar Press community! The studio art and digital media arts programs at Hamline University (St. Paul, Minnesota, USA) are looking to acquire... more
High quality Vandercook 219 Old Style cylinder press for sale in Minnesota for $11,000.
- Power-driven ink distribution with manual feed
- Manufactured in Chicago... more
Free to a good home
Miehle V-50 - worked the last time we tried (about 2 years ago). I turned it on and rolled it over this morning.
Also have parts catalogs and... more
*Sold* Kelsey Mercury 6x10 including 2 chases and newer rollers. This press is in very good shape - I have used it and maintained it for thirty years. It does have some cosmetic... more
Manual Challenge Style 230, hand operated paper cutter for sale along with an aftermarket stand that was assumedly welded for it (detachable) and 3 blades, all three were recently... more
Free to a good home
Miehle V-50 - worked the last time we tried (about 2 years ago). I turned it on and rolled it over this morning.
Also have parts catalogs and... more
For sale is a barely used Kwikprint 55 hot foil stamping machine. It is in excellent condition, sparkling condition and works great. It is an amazing machine and comes with foils... more
I am looking for some rider rollers w/ assembly (part # GT901.025F) for my 13x18 Heidelberg windmill press. Does anyone know where I can get some?
more
Two printers in central Minnesota looking for parts for their ca. 1915 10 x 15” C&Ps—we need a foot pedal, a brake, and the clamps that hold packing in place on... more
Are you interested in being part of a team that is passionate about printing unique products for all of life’s most important celebrated events? Do you strive on quality and... more
Kelsey Mercury Model 6 x 10 Excelsior Model X. I received this item at an auction and do not know much about it. I can try to answer all questions. Someone told me it needs a... more
Hello,
I am looking for a proofing press so my son the budding artist can do woodblock or linoleum prints. An antique machine would be fine, cosmetics are not important. I will... more
I have a steel stone 39 x 65 x 36. It has a little surface rust- not too bad. Lots of galleys & some supplies. It might be going to auction on Monday, so I need a reply... more
