About jonsel

image: jonsel's picture
Recent content
TitleUpdated
Newsprint11 Jul 17
Reproducing first edition10 Oct 16
Heidelberg gripper issue15 Aug 16
Windmill ghosting20 Jul 16
How best to print this11 Jul 16
Mounting large plates13 Apr 16
Vandercook inking problem16 Dec 15
Windmill inking issues2 Dec 15
Bouncy bouncy bouncy24 Nov 15
Printing on photo paper11 Nov 15
Recent comments
TitleDate ↓
I use odorless mineral spirits to clean...16 Aug
You need the wide white suckers...9 Aug
Check the shear collar.9 Aug
How new are you to the Heidelberg?...2 Aug
I think you show the work as an example...31 Jul
Is it possible you have too much ink?...18 Jul
Thanks, Haven. Yes, I'm looking for...12 Jul
Yeah I finally gave up on nickel...27 Jun
Yes, you definitely seem to be missing...26 Jun
...22 Jun
Yeah, Dennis hit it. The ink drum is...20 Jun
Are you oiling the press every time you...19 Jun
The CMYK figures are percentages of...16 Jun
I had this happen on a job awhile ago....12 Jun
Ink is too tacky. I've had this problem...16 May
Let passion be your guide. Do what you...30 Apr
I think you're getting caught up in too...28 Apr
To HavenPress's point, factor in the...21 Mar
I've run my Windmill relatively fast...19 Mar
Can you post a link to the classified...15 Mar
Try putting some tape on the inside of...3 Mar
Loyaltype – Thanks for the...7 Dec
Since you seem to be going for some...6 Dec
I've had decent experiences with...2 Dec
I gave up on rubber-based inks after I...18 Nov
I'm very familiar with both Illustrator...21 Oct
Excellent, thank you!20 Oct
This is the cover I want to reproduce....19 Oct
I've done short-run labels. Most of...19 Oct
I tell all of my customers a minimum...16 Sep
If you're trying to date another poster...16 Aug
After some helpful emails and tinkering...15 Aug
If the client doesn't supply you with...8 Aug
I frequently have several thick pieces...4 Aug
It did take me a while to get up to...25 Jul
Theo, The ink was pre-mixed, so I...24 Jul
I have it on now. The ghosting changed...20 Jul
Tried rotating the plate but still got...20 Jul
I believe the bottom adjustment to...19 Jul
Wow, how many people did this guy reach...13 Jul