About western411

image: western411's picture
  • Member for 17 years 1 day.
  • Last access 18 weeks 4 days ago.
Recent content
TitleUpdated
Windmill wont turn on17 Feb 24
Deep Relief base21 Nov 23
Change V belt17 Aug 23
Foil Setup22 Jun 23
Foil Setup22 Jun 23
Foil Setup22 Jun 23
Embossing22 Mar 22
Embossing - What If...27 Jul 21
Embossing24 Jul 21
Die Cutting Plate14 Nov 20
Recent comments
Title ↑Date
2227printer - Mike -Thank you all for...16 Apr
A LOT OF YOU SUCCESS will depend on...25 Apr
About 15-20 years ago pressman was one...10 Feb
Actually I had stopped using it. I...12 Jul
After Thought. Depending on how you...2 May
All the wires came out through the one...16 Oct
Along his line do we need to lock up...8 Jun
Anniew - We have run the lighter 35 pt...3 Feb
Another tip we use is to add some of...17 Aug
AStro Paper- May have pre score cards...19 Oct
AStro Paper- May have pre score cards...19 Oct
Be sure to check the hydraulic fluid...8 Apr
bppayn, thanks for the feedback about...6 Mar
bppayne - thanks for the feedback. I...31 Mar
bppayne - what and where is the suction...10 Nov
bppayne- the underside wear was from a...4 Feb
Bruce - We are using a 10 x 15 windmill...1 Jan
Can you explain the extended gauge. I...5 Dec
Chrome can develop stains that are...22 Mar
Cold Embossing/Debossing with...11 Feb
cool video. Next time you shoot one...23 Oct
Crown Flexo makes photopolymer...1 Oct
Dennis - thank you for the fast reply....5 Dec
Dennis - the slowest I see on the pully...30 Jan
Dennis - we have had that happen also...14 Dec
Dennis Brian - Thanks again for the...23 Feb
Did the photo rotate when it was...7 Apr
Dito to what the other guys have said....16 Aug
ditto to ericm If the mark is a crush...24 Jul
Do you have any idea of what it might...15 Oct
Do you know a good place to buy parts?5 Dec
Dont laugh at this comment but I have...10 Jul
Don't take this the wrong way, have you...11 Aug
Enriquevw - Thanks for the feed back....17 Mar
enriquevw, thanks for the idea. I...25 Jan
ericm - By the way my slowest speed is...29 Jan
Ericm - Can thermal cut any paper...8 Dec
ericm - thank you for the feedback. We...2 Mar
ericm - Thanks for all you help. The...15 Feb
ericm - Thanks for the feed back. Most...15 Feb