About nervous_john

image: nervous_john's picture
  • Member for 16 years 23 weeks.
  • Last access 18 weeks 4 days ago.
Recent content
TitleUpdated
Challenge 15MA28 Jul 19
Golding Official #2, for parts or trade22 Jul 19
Equipment - 10x15 Windmill, C&P Craftsman Foiler22 Jul 19
10x15 Windmill redball Foil Holder28 Apr 14
Heidelberg Platen 10x15 belt tension23 Apr 14
Foil puller and hotplate for 10x15 C&P1 Jul 13
Recent comments
TitleDate ↓
The heating equipment on the foiling...29 Jan
Annie- That's the correct foil bar for...27 Jun
Max pull on the factory foiler is going...1 Sep
If you want precise register you're...21 Jun
bstuparyk- I'd love to hear more when...19 Jun
It's possible but not for the faint of...13 Jun
Louie Dudas- I think the reasoning that...25 May
Louie Dudas- The reasoning behind...24 May
Every post on this site turns in to...7 Apr
Your thermocouple is a Type J which...14 Oct
We have that system. The unstamped roll...17 Aug
On one of our windmills we used to see...15 Aug
It seems pretty common for the...8 Aug
I believe the factory plate is 8.5 x...5 Jul
In photo 6982 the triangular metal...5 Jul
You can see the little roller bearing...2 Oct
Everything seems to be in order as far...1 Oct
Part T560.026 and T560.027 look right...29 Jun
One thing that happens to us fairly...26 Mar
Since the Pantone mixing guides are...16 Oct
Lutz Machinery (...9 Aug
Already ordered it. Will absolutely...5 May
Thanks for the tip on Lutz Machinery!...5 May
Rubicon327, I don't have one at all....29 Apr
Artcindy I've got you covered. We have...19 Aug
I think the issue isn't that the new...11 Apr
First off thanks to all for really...25 Jul
Thanks for the well thought out...23 Jul
Hmmm. Before the "stupid fad" of...23 Jul
I'm guessing Kluge feeder for two...11 Nov
That crack is in the gear guard on the...10 Nov
If I remember correctly OSHA standards...17 Aug
I can. I just finished restoring an...1 Sep