About BComstock

Recent content

Title	Updated
Briar Press Continuation	15 Feb 23
Printer's Turtle	5 Aug 22
Ink & Iron Letterpress	24 Mar 22
Where to mail Prop Cards	13 Mar 22
Early Line O Scribe Showcard Writer	9 Dec 21
Triumph Proof Press	20 Sep 21
Axe and Tool advertising cuts	1 Apr 21
C&P Rider roller	30 Mar 21
C&P vibrating roller	8 Jun 20
C&P vibrating roller	8 Jun 20

Recent comments

Title	Date ↓
I can't see the photos, but I'm fairly...	16 Apr
Ddprinter Ok, never seen that...	4 Apr
Do the rollers slot into a block and...	4 Apr
As long as the rod isn't pushed too far...	20 Mar
That offset on the arm is supposed to...	20 Mar
Working with overprints is tricky. Any...	1 Aug
Where did you get the new rollers and...	28 Jun
Where did you get the new rollers and...	28 Jun
As John mentioned, this is a Hamilton...	25 Apr
Eric, Sorry if my post accentuated...	20 Feb
I'm always interested in some...	10 Feb
I'm always interested in some...	10 Feb
I took the same measurements that...	5 Dec
I took the same measurements that...	5 Dec
Lloyd at Cook Kettle Press generally...	24 Oct
The initial batch sold out very...	13 Sep
It doesn't match perfectly, but it...	26 Jul
For a Line O Scribe, you can either use...	6 Jul
For a Line O Scribe, you can either use...	6 Jul
Where did you send them? I personally...	5 Mar
Depending on price, I'd be interested....	16 Feb
denisefriendlyfirepaper, doesn't...	22 Dec
They just have the starting serial...	21 Dec
Looking at the chart on the Hern Iron...	20 Dec
Looks like the full range of sizes was...	20 Dec
If anyone wants to do some reading on...	20 Dec
kimaboe, I'd love that file, if you're...	20 Dec
Gerald, I’m curious what your...	17 Dec
moe_szys1ak, thankfully I work in...	17 Dec
Adrian should be fairly close to you...	16 Dec
I got mine from cook kettle press up in...	15 Dec
The grid is 14x22, and has one more of...	15 Dec
Thanks a bunch! Looks like I have the...	13 Dec
James, you are correct, I am missing...	13 Dec
I love that you got up there! Wish I...	6 Dec
If I wasn't on the other side of Lake...	28 Oct
Wonderful work here! Till now, any time...	18 Oct
Personally I don't go for deep...	12 Oct
Avins Hardware Try Mohawk superfine...	11 Oct
Mari23, have you fully loosened the nut...	5 Oct