About Jeff Shay

image: Jeff Shay's picture
Recent content
TitleUpdated
Griffin Litho Press info needed15 Feb 12
Recent comments
TitleDate ↓
The kitchen version of Mike’s...18 Feb
Good on you, mnmom64. Those fonts...2 Oct
Unfortunately the economics are against...1 Oct
Mick — as a point of accuracy, litho...19 Sep
ericm — True if these bearings were...20 Jun
I tend to agree with John — the ink...30 May
McMaster-Carr — great website and...25 May
Also check that the roller arm...18 May
First, google "C&P oiling chart" and...7 May
I would get a 125 amp panel installed...25 Mar
Skiyou is probably right about the...20 Mar
...5 Mar
Actually the Kimball variable speed...23 Feb
McMaster-Carr — part number 6086K19...23 Feb
Mine is about 31 1/2” from the front...13 Feb
While you could do a print run off the...6 Feb
Wei T'o is the one Talas sells, and has...21 Jan
Fritz is correct -- oil dries by...15 Dec
It can, but not nearly as well as some...24 Aug
Congrats Fritz! From myself and all the...2 Jun
There is at least one remelter in the...16 May
It's called a gib key and is used to...9 Dec
Mick -- We're aware of the curved type...8 Sep
Well Dick -- if you ever make it to the...6 Sep
A couple of clarifications -- C.C.Stern...31 Mar
Michelle -- this press has no drive...28 Mar
Yes, you would have to crank the pot up...26 Mar
Not much has been said here regarding...25 Mar
CastOr oil... 6 Mar
Peter is correct -- that said, if you...5 Mar
Rubber rollers are actually ground on a...5 Feb
It's fairly common -- we have several...6 Aug
Also be aware that during the heyday of...3 Aug
McMaster-Carr sells quoins for the...28 Dec
And not all of us who run hot lead...18 Nov
Brand is probably not so important...25 Jul
To chime in on the micrometer/caliper...11 Jul
Yes, NA Graphics does have new trucks...2 Jul
Patrick --You can get adjustable v-belt...15 Jun
I use etching and hand litho inks all...4 Jun