About Fritz1

image: Fritz1's picture
Recent content
TitleUpdated
Are they still open?15 May 23
Proudly Advertising Letterpress12 Jul 22
Italian Type Founders8 May 22
Jack Beall Verrtical Service20 Apr 22
David Godine at 50 Years of publishing20 Mar 22
Greg Walters17 Jan 22
A nice conversation13 Nov 21
Letterpress equipment under the ax6 Nov 21
Thompson Plant to be razed27 Oct 21
Pressboard4 Aug 21
Recent comments
TitleDate ↓
I didn't expect to see my cases...27 May
Thanks--I was aware of the website, and...17 May
I have seen cabinets like that used in...20 Apr
All fine typefaces. I have the ATF mats...1 Apr
Another source is to look at older...28 Mar
Another source is to look at older...28 Mar
The upper stick is a self-centering...12 Mar
And from the photos, this appears to be...27 Feb
That sure looks like a 10x15 to me, but...25 Feb
Actually there are a number of ads with...19 Feb
Actually there are a number of ads with...19 Feb
Varn Products has discontinued...14 Nov
Varn Products has discontinued...14 Nov
I take it that you are referring to...12 Nov
I was working in 1969 just a couple of...17 Sep
While they appear to be the same face...12 Feb
The rollers are suspect as well as...10 Feb
To add to Paul's comments, what is the...9 Feb
Greg's obituary is here:...19 Jan
I have used my Mammoth furniture where...2 Nov
Yes, I would be coming home with a semi...31 Oct
What seems to be missing so far in this...23 Oct
I had dreadful feeder problems with my...13 Oct
I have several hundred master...5 Sep
Here's a view of the one I...31 Aug
Would someone please measure the...31 Aug
A more technical name for scraper is...22 Aug
The chase has a very old form locked in...21 Aug
Perf-a-base should not be confused with...15 Aug
The caliper we settled on is .020". It...5 Aug
I must be getting old but I don't see...9 Jul
There are no replacement handles...8 Jul
General Printing by Cleeton and others...19 Jun
We just can't order pressboard from the...14 Jun
The press needs an ink plate, and ink...15 May
The version I have long known was the...25 Apr
I just heard from our other printer on...10 Apr
A little up date on Paul. I just talked...10 Apr
We've been working on a new run of...8 Feb
That's a better lockup than many I've...17 Jan