About Peter Luckhurst

image: Peter Luckhurst's picture
  • Peter Luckhurst
  • Cutting and creasing services
  • UK England
Recent content
TitleUpdated
Machine minder / machine manager / printer15 Jun 12
Assayer in the uk ?17 May 12
Windmill wash up unit6 Feb 12
What is a dingbat ?29 Dec 11
a hint6 Nov 11
Recent comments
TitleDate ↑
sorry to upstage anyone but once...21 Sep
you should not need to take a hammer to...21 Sep
i just addressed the same answer to...21 Sep
many of the die hard pressmen i learned...22 Sep
look at the opening adjusters there...22 Sep
Tell me how much a ten pound box of the...22 Sep
I once had to hand feed whole exercise...22 Sep
I am sure you are going to get sick of...22 Sep
I get the impression , that trucks as...22 Sep
If you want a quick fix to keep the...28 Sep
This is a common problem , if you have...5 Oct
if you run with the sidelay right in...5 Oct
I have worked around the print all my...5 Oct
The measurement from the bed to the bed...8 Oct
If you oil the gear on the end of the...8 Oct
too much pressure at top of platen...8 Oct
Best kept to the composing and proofing...8 Oct
You would get the right answer if you...15 Oct
The welding of cast iron is a bitch...15 Oct
In the trade in the uk we all use...15 Oct
Ok i can accept the description...17 Oct
You can still get new cornerstone...17 Oct
The little lock nuts are probably the...18 Oct
Two lugs to the bottom of the platen...18 Oct
I am sure one of you knows there is an...18 Oct
Sorry the screw too far in will cause...22 Oct
Pin locates from above punch it out...22 Oct
If you have a dent in the stock you...24 Oct
Dick G In your case its become a...24 Oct
The rusting crap that passes me now and...24 Oct
Some heidelberg platens ring a bit when...31 Oct
what is the scale on the impression...6 Nov
P imp We call this toe ing and...6 Nov
conqueror papers print ok. of course...6 Nov
fritz spot on answer you dont crash...6 Nov
Note the boxes for crash numbering are...6 Nov
Note . try too not have the sidelay...6 Nov
Basically check that your collar is...10 Nov
Firstly are you producing your film...11 Nov
Top answer, cast is difficult and yes...12 Nov