About Peter Luckhurst

image: Peter Luckhurst's picture
  • Peter Luckhurst
  • Cutting and creasing services
  • UK England
Recent content
Machine minder / machine manager / printer15 Jun 12
Assayer in the uk ?17 May 12
Windmill wash up unit6 Feb 12
What is a dingbat ?29 Dec 11
a hint6 Nov 11
Recent comments
TitleDate ↓
Printing 918, (23.30mm) use 890 (22.80)...28 Feb
I am not reading twice an evening at...27 Feb
The arrival of some new type is a...26 Feb
Sorry beings but that bent tab is...26 Feb
Before you move it to the right ,or at...26 Feb
If it was ok previously and you havent...26 Feb
That pawl is the right bit it just...24 Feb
Nylon colar stiffeners still work well!23 Feb
Mick just think cigar storage gizmo...22 Feb
As for the brass sheet ,an old pre war...22 Feb
I am familiar with spot uv working butI...22 Feb
A man can be driven in many directions...21 Feb
In the case of the model you show the...21 Feb
I struggle to comprehend your weight...21 Feb
The adana comes to rest when the arms...21 Feb
Cant remember the artist but "spirit in...20 Feb
I have never tried this as we dont...20 Feb
It is possible ,even likely ,you are...19 Feb
I think its a poor translation of...18 Feb
I would worry about the risk of it...18 Feb
how to reduce the work of forgers...18 Feb
Pint of petrol and a match .18 Feb
Try using fewer seperator springs and...17 Feb
The filters are normally blocked with...16 Feb
Certainly , something that we greatly...15 Feb
Pump filter just dunk it in a bean can...15 Feb
If the original pin was brass then...14 Feb
Heidelberg were not as skilled at...14 Feb
If you have space and time why not have...14 Feb
I cant imagine this face would last...14 Feb
Yours may also need some oil too ...12 Feb
Me thinking his side gauge for the...12 Feb
Pins are basically bits of steel bar...12 Feb
you may also find opening one off the...12 Feb
Do you boys have anything relating to...11 Feb
It is not unusual for a printer to wash...11 Feb
Most often the lube fittings are just...10 Feb
Ooh a lay locking screw that hasnt been...10 Feb
Whilst the manual shows the guide out...10 Feb
You have a brass guide on the right...10 Feb