About HavenPress

image: HavenPress's picture
Recent content
TitleUpdated
Heidelberg Windmill Black Ball, C&P 10x15 Platen...10 Apr 17
SAD.27 Feb 17
Large format Vandercook ~ Universal IV or a 42-2826 Apr 16
Quick Uni-I measurement5 Mar 16
Stripping a Brandtjen and Kluge WFD12838...23 Oct 15
Cheap Steel composing surface top Hamilton Galley...19 Aug 15
Little Giant #6 - NY State28 Apr 15
I/S/O (better) Foil Stamper in NYC area8 Apr 15
Drilling paper, but not with a paper drill bit22 Jan 15
Letterpress shops in S/E Asia?2 Jan 15
Recent comments
TitleDate ↓
(I couldn't help making a light hearted...17 Apr
Sounds like you possess some sweet...17 Apr
(So if that is a problem, another thing...17 Apr
Hey, just a quick thought, not sure it...17 Apr
Hey Jen3- Definitely not a silly...10 Apr
Yeah, I would add to the sentiment that...6 Apr
Hey old letterpress man, supplying...6 Apr
For comparison, I think the same thing...31 Mar
Thomas, how perfectly condescending of...28 Mar
Look into Gans Ink; they sell in 1 lb...27 Mar
Hey Mike- Do you stick the plastic to...20 Mar
mainly I've had problems with bounce...19 Mar
305 MC - 30" hydraulic paper cutter and...16 Mar
But a good hardwood block is useless...16 Mar
I agree with the other two that it...16 Mar
Not in one pass. But if you take the...15 Mar
Valterri- glad you found the solution...14 Mar
http://briarpress.org/46483 See...14 Mar
OK great- (I hope my advice came off...14 Mar
If it is not a pressure issue or an...13 Mar
The gripper bars- as mentioned- are...8 Mar
There are also Eyelets- you will need a...8 Mar
Your dies can have a hole-punch in the...8 Mar
Have you tried turning over the press...7 Mar
And at several thousand dollars for the...27 Feb
Dolly- Because often, a drawdown on...27 Feb
ericm- thanks, I am curious about it...25 Feb
dickG - you should start a printing...21 Feb
(Mind you, I am no expert, I am...21 Feb
Question- why not foil over foil in...21 Feb
Worth noting that a simple gentle grade...19 Feb
There are two screws with set collars...29 Jan
The stuff is really hard, so it's going...24 Jan
Are you stacking them in a perfect...24 Jan
Dantheprinterman - I have had some...21 Jan
I agree with Eric M, you could damage...7 Jan
...29 Dec
How's that left elbow feeling?22 Dec
Hey Reggie- The windmill has a...18 Dec
Err, if it wasn't clear in my post.. I...18 Dec